达茂东源铁矿年产170万吨初步设计毕业设计说明书.doc

PAGE 本科生毕业设计说明书 达茂东源铁矿年产170万吨初步设计 摘 要 本设计是达茂东源铁矿露天开采的工艺与开拓设计。年产量170万吨,最低标高1470米，台阶高度10米。 本矿采用汽车螺旋坑线开拓。 工艺部分包括穿孔设备选型及其数量的计算、电铲设备的选型及其数量的计算、汽车数量的计算及选型、推土机选型及数量计算、辅助设备的选型及数量的计算等。爆破方法的选择及药量计算，运输调车方式的选择，排土方法的选择及排土计算。 关键词：露天开采 开拓 工艺 采掘进度计划 Abstract This open-pit exploitation and development design is applied to Damao Dong Yuan Iron Mine, with an annual output of approximately 1.7 million tons, the lowest level of mining is 1470 meters,the hight of step is 10 meters. Open-pit boundary is contoured with the application of the rule of boundary stripping ratio less than or equal to economic stripping ratio. And make a calculation of proved reserves and average stripping ratio. Throughput is verified by extension rate of the mine. When working out the open-pit excavation progress schedule, production stripping ratio is initially decided by the approach of average stripping ratio multiplied by coefficient while efficiency of electric shovel selected on the basis of similar mines.  The mine is exploited by vehicles along the slope of the spiral pit-line. Techniques include the selection and calculation of drilling equipments, electric shovels, vehicles, bulldozer as well as assistant auxiliary equipments. Blasting method is the selection of dosage and calculation; shunting method is the selection as well as the selection of dumping and dumping calculation. Keywords: open-pit mining; development; technology; excavation progress schedule 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc232837888 摘 要 PAGEREF _Toc232837888 \h I HYPERLINK \l _Toc232837889 Abstract PAGEREF _Toc232837889 \h II HYPERLINK \l _Toc232837890 第一章 矿区概况 PAGEREF _Toc232837890 \h 1 HYPERLINK \l _Toc232837891 1.1 矿区地理交通位置 PAGEREF _Toc232837891 \h 1 HYPERLINK \l _Toc232837892 1.2 矿区水文、地文 PAGEREF _Toc232837892 \h 1 HYPERLINK \l _Toc232837893 第二章 矿床地质特征 PAGEREF _Toc232837893 \h 2 HYPERLINK \l _Toc232837894 2.1 区域地质特征 PAGEREF _Toc232837894 \h 2 HYPERLINK \l _Toc232837895 2.1.1 地层 PAGEREF _Toc2