基于S7-200PLC的液氨汽化器.doc

2013届 　　 　　　 　　　　　 分类号 　　　　　　　　　　　　　　　　　单10452 毕业论设计 学 号　　　 200 　　　　　　　年 级　 2009 　　 　　　　　　　专 业　　 电气动 　　　　　　　指导教师　 2013 年 5 月 8 日 诚 信 声 明 本人呈交给临沂大学的这篇毕业论文，除了所注参考文献和世所公认的文献外，全部是本人在指导老师指导下的设计成果。 学生签名： 日 期： 经检查该毕业设计（论文）为独立完成，不存在抄袭现象。 指导老师签名： 日 期： 摘 要 从纪8090年代中期，PLC得到了快速的发这时PLC在处拟数运络PLC逐渐进过领应过领处统DCS系统PLC具有通用性强、适应广强编简单点PLC在工业动别顺预见将来无绍调节阀为对压力变PT100，实现对压力温检测传S7-200PLC为统PID算法，运PLC梯形图编语进编实现动 本文根据汽化器的控制系统变选PLC配置、电气原理图等几方面进阐过统响应、稳点对工业现实义关键词温压力；PLCPID Abstract From the 80s of the last century to the mid 90s, PLC obtained the fast development, in this period, PLC capability in dealing with analog, digital operation ability, ability of man-machine interface and network capacity has been greatly improved, PLC gradually into the process control field, the DCS system is in a dominant position in the process control field replaced in some application. PLC has strong commonality, convenient use, wide adaptability, high reliability, strong anti-interference ability, simple programming and so on. PLC in industrial automation and control, especially the sequence control the position, in the foreseeable future, is no substitute for. This paper introduces the control valve for the controlled object, the pressure transmitter, PT100, to realize the pressure, temperature detection, transmission, using S7-200PLC as the controller, constitutes a carburetor control system; using PID algorithm, using PLC programming language programming, to achieve automatic control carburetor. According to the working principle of control system of the carburetor, discussed several aspects of the selection of transmitter, PLC configuration, electrical principle diagram. Through the transformation of the control system has fast response, good stability, high reliability, practical significance for industri