某摩托车车架头部焊接生产的工艺设计.docVIP

XX大学本科学生毕业设计（论文） 168摩托车车架头部焊接生产的工艺设计 校徽 学 生：X X X 学 号：20XXXXXX 指导教师：X X X 专 业：XXXXXXXX XX大学XX学院 二OXX年X月  Graduation Design (Thesis) of XX University The Welding Technology Design of the Head of the 168 Motorcycle Frame Undergraduate: XXX Supervisor: XXX Major: XXXX XXX XXXX XX 20XX  摘 要 本文主要是进行焊接工装夹具设计和焊接工艺设计。而正确地设计、选用各种工装夹具，可以缩短装配、焊接时间，减少工人的劳动强度，提高劳动生产率，保证产品的装配精度和焊接质量，还可以充分发挥焊接设备的潜力，扩大其使用范围，并有利于实现焊接作业的综合机械化和自动化。焊接夹具是焊接工艺能否顺利、正确执行的保证，而工艺过程是否合理也影响夹具的设计和使用效果。所以兼顾工装夹具和焊接工艺，设计出合理的夹具及工艺，是很重要的。本课题优化出较好的。  ABSTRACT This paper mainly presents fixture design and welding technology design of the head of the motorcycle frame welding. Proper design and selection of various fixture can not only shorten the assembly and welding time, reduce labor intensity of workers, raising labor productivity, and ensure accuracy of product assembly and welding quality, but also can give full play to the potential of welding equipment, expand the scope of its application, and will be conducive to the realization of the comprehensive mechanization and automation. Welding fixture is the guarantee of the smooth and correct implementation of welding process. Moreover, the process whether it is reasonable also affects the design and effect of the use of fixture. So in the view of fixture and welding technology, it is very important to design a reasonable fixture and welding technology. The subject by the welding material analysis and welding process analysis of product, to choice a reasonable selection of welding methods and the welding process parameters, and develop practical welding technology scheme. At the same time，the subject presents the fixture design. Finally, drawn the assembly drawing and part drawings of the fixture, given a detailed account of the head of the motorcycle frame welding process. Keywords： Motorcycle, Head of the frame, Welding, Fixture design 目 录 摘要 Ⅰ ABSTRACT Ⅱ 1 绪论 1 1.1引言 1 1.2课题目的 1 1.3重点研究内容 2 1.3.1 焊接方法 2 1.3.2 焊接工艺方案 2 1.3.3 焊接工装夹具 2 2 16