(毕业论文)基于单片机的智能型可燃性气体泄漏报警器的设计.docVIP

 毕业设计（论文） 题目：基于单片机的智能型可燃性气体泄漏报警器的设计 姓名： 专业：自动化 学院：继续教育学院 学习形式：自考专升本 助学单位：辽宁石化职业技术学院 指导教师： 2013年5月  毕业设计（论文） 说明书 题目基于单片机的智能型可燃性气体泄漏报警器的设计 院别：继续教育学院 专业：自动化 班级：自动化112 设计人： 指导教师：  毕业设计（论文）任务书 一、题目： 基于单片机的智能型可燃性气体泄漏报警器的设计 二、基础数据  三、内容要求： 1.说明部分： 2.计算部分：  3.绘图部分： 四、发给日期：年月日 五、要求完成日期：年月日 指导教师： 系主任： 年月日 摘要 关键词：Abstract With combustible gas type and application area increases, the use of local and gas storage warehouse leaks, fire and explosion incidents are increasing. From the safety, environmental and economic point of view to consider, of a measure of flammable gas alarm device, and automatically opens a discharge control device is very important.. This design for combustible gas leak alarm, and a controller in-depth study, using a probe plus MCU control circuit design thinking, with a small error, fast response and so on. Selection TGS-813 semiconductor ceramic gas sensor for measuring the concentration of flammable gas field, the use of higher cost and functionality AT89S51 microcline as the central processing unit of the concentration signal collection, data do processing, display, alarm and open the exhaust other steps. The design of the combustible gas alarm, the controller can be measured into the air to gas-based and diverse alkane concentration of flammable gas, real-time display of concentration values, when it reaches a pre-set limit alarm value, the alarm sounds and control signals to prompt the operator to take safety measures or automatic control related safety equipment. The alarm, the controller in real time, accurate measurement of combustible gas concentration, and the reliability and accuracy of the alarm can be long, with a very broad application prospects and value. Keywords：divulging alarm; combustible gas ;single chip microcomputer; gas sensor目录 摘要 I Abstract II 目录 III 1绪论 1 1.1单片机的背景 1 1.2课题国内外研究的现状 1 1.3半导体陶瓷式气体传感器原理 2 2 硬件简介 3 2.1AT89S51单片机概述 3 2.1.1 AT89S51单片机引脚说明 3 2.1.2 AT89S51单片机的时钟及复位 5 2.2各芯片功能及工作原理 6 2.2.1 8位数码管 6 2.2.2 74HC04芯片