基于PLC控制三层饭店送饭系统.docVIP

基于PLC控制三层饭店送饭系统 摘 要 随着微电子技术和计算机技术的迅速发展，PLC（即可编程控制器）在工业控制领域内得到十分广泛地应用。PLC是一种基于数字计算机技术、专为在工业环境下应用而设计的电子控制装置，它采用可编程序的存储器，用来存储用户指令，通过数字或模拟的输入/输出，完成一系列逻辑、顺序、定时、记数、运算等确定的功能，来控制各种类型的机电一体化设备和生产过程。三菱FX1S-30MRCAD图纸，凡下载了本文的读者请留下你的联系方式（QQ邮箱），我把图纸发给你。最后，希望此文能够帮到你！ Based on PLC control layer 3 hotel dinner system ABSTRACT With microelectronics technology and computer technology to develop rapidly, PLC (programmable controller) in the industrial control area are very widely. PLC is based on a digital computer technology, designed for industrial application and design under the environment of the electronic control unit, it USES programmable memory, storage for user instructions, through digital or analog input/output, complete a logical sequence, timing, etc, operation of function, to control all types of electromechanical equipment and production process. This design mainly introduces three layers of PLC control system, due to the restaurant meals in the automatic control of PLC has many advantages, here so I choose the main function is to realize. Technical requirements: each layer with other two layers of selected layer button. Press one layer of selected layer button, choose layer, the corresponding signal is registered to choose layer indicator. Lift up the layer can be loaded with goods, and will be shut doors, hall, and runs away elevator automatically selected floors. Such as elevators reach this layer 10s not open the door, after their outcry be removed, the hall was cleared, elevator response other layer hall. When the elevator in turn, can repair by the slow and slow button at moving enclosure. Control requirements: each layer has elevator position indicator function calls and function of the speed limit and reliable function Content: the design principle of the electric control design of PLC selection and the I/O port distribution of PLC control program written instructions written according to the requirements of graduation design drawing design pattern. KEY WORD