电气专业毕业设计论文(本科)- 电机智能监测系统的设计.doc

电机智能监测系统的设计 物理与电子信息学院 电气工程及其自动化 学号：指导老师： 摘要本文设计与开发了电机智能监测系统。本系统上位机使用“组态王”软件进行监控，下位机使用电机智能综合保护器，二者采用RS485转RS232通讯方式，以Modbus通讯协议RTU报文传输格式进行通讯。针对三相异步电动机的过载、断相、过压、欠压等故障的特性，通过单片机的综合处理实现保护，实现了电动机的实时监测与有效保护。不仅可以提高工厂自动化和机电设备管理水平，同时对机电设备的工况在线监测，及时提示设备故障及具体信息，统计设备运行时间及能耗，提示管理人员对设备进行维护、管理，获取设备能耗状况，从而降低设备事故发生率，延长电机设备使用寿命，保障工厂正常生产。 关键词：电机智能保护器；在线监测；组态王；Modbus RTU；RS485The Design of Intelligent Motor Monitoring System Wang shuang College of Physics and Electronic Information Electrical Engineering and Automation No: 100542020 Tutor: Zhang Shuan ji Abstract: In this paper the design and development of intelligent motor monitoring system. The host computer using the configuration software to monitorthe lower machine using the electrical machinery intelligence protection device, between the two RS485 to RS232 communication method, RTU message transmit format of communicate with in order to Modbus communication protocol. Microcontroller integrated treatment for three-phase asynchronous motor overload, phase failure, over voltage, under voltage and other fault characteristics, protection, real-time monitoring and effective protection of the motor. Can not only improve the management level of factory automation, and mechanical and electrical equipment, at the same time-line monitoring of the conditions of the electrical and mechanical equipment in a timely manner to prompt the equipment failure and specific information, statistics, equipment run time and power consumption, suggesting that the management personnel of the equipment maintenance, management, access to equipment can consumption conditions, thereby reducing equipment accident rate, extend the life of the electrical equipment to protect the normal production of the factory. Key words: Intelligent motor protective device; on-line monitoring; King view; Modbus RTU; RS485 目 录 摘要 1 1 引言 5 1.1 课题提出的依据和意义 5 1.2 针对工厂电机的工况监测和故障诊断系统 5 2电机智能监测系统设计框架 5 2.1 本课题的主要任务 5 2.2 本课题的主要内容 6 2.2.1 电机智能监控系统原理图 6 2.2.2 电机智能监测系统设计原理 7 3电机智能