背门设计.pptVIP

The inner panel flange where it contacts the outer panel is extremely critical any waviness, misalignment or burrs will be evident in the finished hemmed product. It is assumed that this inner panel touchdown flange will be treated as a class “A” surface. The inner and outer panel should not be welded prior to hemming. Welding causes internal strains and prevents proper location of the inner to outer during the hemming process. Liftgate / Decklid Hemming Inner Panel Touchdown Liftgate / Decklid Hemming GDT Requirements * stoop Liftgate Header At Center Line Of Hinge B01 Interior Parameters Lif