EDA课程设计--数控脉冲宽度调制信号发生器.docVIP

摘 要 本设计采用EDA技术，通过FPGA芯片实现了数控脉冲宽度调制信号发生器的设计，本文采用 硬件描述语言电路，完成对电路的功能仿真将大量的电路功能集成到一个芯片中，并且可以由用户自行设计逻辑功能，提高了系统的集成度和可靠性。 关键词：EDA技术、FPGA芯片、硬件描述语言、信号发生器 Abstract This design uses the EDA technology, through the FPGA chip to realize numerical control pulse width modulation signal generator design, the use of Verilog hardware description language to describe the circuit circuit, complete function simulation. Through the D trigger and two can be loaded in 8bit counter lcnt8.v to achieve the design. Compared with traditional design methods, the design adopts FPGA chip to achieve, it will be a large numbe