发动机支架立式单面组合钻床设计毕业论文.docVIP

摘 要 本次设计的题目是发动机支架立式单面组合钻床设计，是在发动机支架上加工4个深6mm，尺寸要求17的孔。 本次设计分为总体设计和主轴箱设计两个部分。首先，对机床进行总体结构的设计三图一卡”即被加工零件工序图、加工示意图、机床尺寸联系总图以及Abstract The design topic is Engine bracket of vertical single combination drilling machine design. Aimed at the engine support processing 4 meet the size requirements of the 17 and 6mm deep hole. The design is divided into two parts overall design and the headstock design. Firstly, the overall structure of the machine tools design, need to determine the cutting parameters, calculation of cutting force, cutting torque, cutting power and tool life, and thus determi