化工气力输送系统压降模型的优化设计.doc

化工气力输送系统压降模型的优化设计 摘要低成本、污染小、安全可靠等优点化工、食品、等领域广泛应用平T型分支管道在水平T型分支管道中进行气力输送。通过改变管扬升高度发送压力、输送体流量对各分支管路阻力特性的影响进行了实验研究 实验结果表明：管扬升高度变化后发送压力对各分支管路的阻力特性影响较大随着发送压力的增大，分支管路的单位长度压差变大两分支管路的分配特性随着扬升高度增加及发送压力的增大变化较为复杂。关键词：气力输送分支管扬升高度he optimal design of pressure drop model of chemical pneumatic conveying system ABSTRACT Pneumatic conveying，also known as air transport, or as Pneumatic transportation. In certain conditions, a powder material environmental efficient technology uses the air as a carrier medium for the transmission of streaming particles. It has a low-cost, low pollution, safety and reliability. and has widely used in the chemical, power generation, pharmaceutical, food, machinery manufacturing, feed, construction, metallurgy and other fields, and has become the key technologies to decide Whether the rapid and stable development of the national economy. The research purposes and methods of this paper: The main research of the paper is the influencing factors of resistance characteristics of gas-solid flow conveying system in the horizontal T-branch pipe. Through the analysis of these influencing factors, we can reduce the resistance loss and save energy on the pipeline process optimization design. The research methods of this paper show that the experiments of pneumatic conveying conducted in the horizontal T-branch pipe. By changing the ascension height of pipeline network, sending pressure, conveying gas flow, two branches of the pipeline valve opening, the influencing factors of resistance characteristics would be analyzed and studied. The experimental results show that: Valve opening have an influence on resistance characteristics of each branch pipe, but not obvious. Changing the ascension height of pipeline network, the sending pressure have a greater impact on resistance characteristics and distribution characteristics. As the sending pressure increases, the pressure of unit length of branch pipe becomes larger. Two distribution characteristics of branch pip