基于单片机的医用恒温箱的设计毕业设计论文.doc

基于单片机的医用恒温箱的设计 摘 要 随着智能控制技术的不断发展，在现代工农业生产以及科研实验的许多场合，需要及时准确地获取温度信息，并完成对温度的预期控制。单片机在检测和控制系统中得到广泛的应用，温度则是系统需要测量、控制和保持的一个量。因此，对温度系统的设计与研究一直备受广大科研工作者的重视。 文章从硬件和软件两方面介绍了80C51单片机温度控制系统的设计，对硬件原理图和程序图作了简洁的描述。此次设计的温度控制系统主要是由中央控制器、温度检测器、显示器等模块组成。温度检测部分采用DS18B20温度传感器，用LED数码管做显示器。温度传感器DS18B20采集温度信号送给单片机，单片机对信号进行相应处理，并把温度数据送LED显示，从而实现对温度控制的目的。 关键词：80C51单片机温度控制 onstant Temperature System Of Intelligent Based on MCU System Abstract With the continuous development of intelligent control technology, it is necessary to know temperature information correctly and immediately in modern industry, agriculture, research and experiment, and accomplish control to the temperature. Thus MCU get wide application in measurement and control system. Temperature is a number which needs system to detect, control and keep. Therefore many researchers always attach much importance to the design and research of temperature system. Taking a strong function 8 bit MCU?0C51 which is introduced by ATMEL company for core, temperature-automatic control system aims to design a temperature controller for grain situation witch has those functions: flexible temperature set, figure display, voice alert, etc. After modified, it can be used to control other numbers . The paper gives an introduction about the design of MCU-80C51 temperature control system in software and hardware. The paper also briefly describes the hardware schematic graphic and program chart. The temperature control system of this design is mainly composed by central controller, temperature detector, display, etc. in the temperature detecting part, it adopts temperature sensor DS18B20, and displays with LED digital tube. The temperature sensor DS18B20 capture temperature signal and send to MCU. Then MCU processes these signals and transmits temperature data to LED displaying. Thereby it realizes the purpose to control temperature. Key Words: MCU?0C51c；Incubator；Temperature control 毕业设计（论文）原创性声明和使用授权说明 原创性声明 本人郑重承诺：所呈交的毕业设计