基于plc的板材定长锯切机控制系统.docVIP

本 科 毕 业 论 文（设 计） 题目：基于plc的板材定长锯切机控制系统 摘 要 经过上个世纪80至90年代中期的快速发展, PLC可编程序控制器(PLC)的能力得到了很大的提高,在此期间,在处理模拟和数字的计算能力、人机界面的能力和网络功能的能力都有了很大的提高,逐步涉足于此领域的过程控制,取代了在某些领域中应用的工艺控制主导DCS。PLC具有用途广泛,使用安逸,适应性广,可靠性高,抗干扰能力强,简单等优点，尤其在工业自动化控制时序的应用上,在可预见的未来,是无法替代的，板材定长锯切机是机械工程行业不可或缺的作业工具。就板材锯切机的具体工作方案，目前可主要划分为两种：一种是种是关键词PLC Abstract From the last century to 90 in the mid 80s, PLC has been rapid development in this period, PLC capability in dealing with analog and digital computing man-machine interface capabilities and network capabilities are greatly improved, PLC gradually entering the field of process control, replaced in some applications in the field of process control dominant DCS.PLC has the versatility, ease of use, wide adaptation, high reliability and strong anti-interference, simple to program and so on PLC control, especially in the industrial automation sequence control the position, in the foreseeable future, is no substitute. Since the 1960s, was launched in the programmable logic controller to replace traditional relay control device since, PLC obtained fast development, In the world can be widely used. Meanwhile, PLC function also continuously improved. Along with the computer, the signal processing technology, control technology network technology unceasing development and user demand unceasing enhancement, PLC in the switch quantity processing based on increased analogue processing and motion control etc. Function. Meanwhile, PLC function also continuously improved. Todays PLC no longer bureau be confined to logic control, motion control, process control etc also plays a very important role. This paper proposed one kind of CNC machine tool design proposal which is suitable precisely cuts. This plan uses the machinery to touch the sensor, triggers the sensor through the control lathe tool movement, and the PLC put the sensor signal to the CNC system, at last, carries on the corresponding data processing