基于3G技术的视频传输终端的开发与实现.docVIP

XXXXXXXXXX 学号：XXXXXXXX 基于 3G 技术的视频传输终端的设计 学生姓名：XXX 指导教师：XXX 所在院系：XXXXXX 所学专业：XXXXXXX 研究方向：XXXXX XXXXXXX 中国·XXXXX 2012年月 Student ID： 3G technology based on the video transmission terminal design Name：Tutor：College：Major：Direction： · China June 2012  摘 要 3G无线网络CDMA20000-1X EVDO网络已经全面投入商用，作为发展最为成熟的无线网络，拥有着先进前端的前向链路和资源调度等关键技术，对未来的移动通信、视频传输、监控系统等方面都有着深远的影响。而监控系统的全球覆盖，ARM9处理器芯片功能的日益强大，视频编解码标准日益完善，更是推动了无线视频监控系统的全速发展。本文围绕着视频传输终端，对系统的软硬件平台的创建进行了详细的描述，并将基于MC8630芯片的3G模块的软硬件实现过程进行了分析，具体工作如下： （1） 研究了远程视频传输终端的现状与发展前景，根据课题的研究意义，提出了本系统具体的实现方案。 （2） 从视频编解码标准入手，分析了当下流行实用的编解码标准MPEG-4、JPEGDESIGN OF VIDEO TRANSMISSION TERMINAL BASED ON 3G ABSTRACT The third generation wireless network CDMA20000-1X EVDO has been fully put into commercial service. As the most maturely developed wireless network, it has the most advanced key technologies such as forward link design and resource scheduling., which has profound influence on future mobile communications, video transmission, monitoring system and so on. And the globalization of monitoring system, increasingly stronger function of ARM9 processor chip, and perfecting standard of video coding and decoding push forward the fast development of wireless video monitoring system. With the theme of video transmission system, this paper gives a detailed description on how to establish the software and hardware platform, and analyses the implementation procedure of3G module by software and hardware based on chip MC8630. The work is as follows: (1) Make a study on the current situation and development prospects of remote video transmission terminal and put forward the implementation of this terminal according to the meaning of study on this subject. (2) Analyses the popular standard for video coding and decoding such as MPEG-4,JPEG andH.264. Realize the procedure of capturing for chip TW2835, which is used in this system.(3) With processor GM8180 as core, analyses