设计一座120t×2的氧气转炉炼钢车间.毕业设计.docVIP

河北联合大学轻工学院 QINGGONG COLLEGE, HEBEI UNITED UNIVERSITY 毕业设计说明书 设计（论文）题目：设计一座120t×2的氧气转炉炼钢车间,产品自定 学生姓名：袁红荣 学 号：200815180124 专业班级：08冶金1班 学 部：材料化工部 指导教师：艾立群 教授 2012年5月22日摘 要 本设计题目为设计一座120t×2的氧气转炉炼钢车间。本设计在广泛参考相关专业书籍的基础上，结合国丰钢铁集团中厚板实习经历对专业知识的综合运用。为了适应市场需要，该车间产品定位在中厚板。该车间主要设备为两座公称容量为120t的氧气顶底复合吹转炉，两座LF炉，两座RH炉和一座铁水预脱硫站。该设计对转炉以及与转炉生产相协调的一些辅助系统的设计方案进行了比较和确定，且均达到了国内外平均先进水平。这些系统包括铁水供应系统、废钢供应系统、散装料供应系统、铁合金供应系统、氧气供应系统、烟气净化系统、炉外精炼系统，浇注系统和炉渣处理系统等。同时，本设计还对各系统的相关参数进行了计算。主要包括转炉炉型计算、氧枪计算、烟气净化系统计算、车间设备的计算和各跨间跨度的计算。另外溅渣护炉、铁水预处理、炉外精炼技术以及钢液面的控制均采取了国际先进水平。 本设计完成氧气转炉炼钢车间设计说明书一份，车间平面工艺布置图、纵剖面图、横剖面图各一张。 关键字：转炉；设计；中厚板；炉外精炼；铁水预处理 ABSTRACT The subject is for the design of a 2 × 120t BOF steelmaking shop. In order to adapt to market needs, based on the related references and the experience of Tangshan Guofeng Iron and Steel Plate plant, the design aimed at the plate production. The main equipment of the workshop includes two 120t nominal capacity Top and Bottom of the oxygen-blown converters, two LF furnaces, two RH refining units and a hot metal desulphurization station. The different design idea and plans of the plant, as well as coordination with the auxiliary systems are compared and the plant unites are specficated. This plant has reached the advanced level of the average home and abroad. Designed systems include the hot metal supply, scrap supply, bulk material supply, ferroalloy supply, oxygen supply, flue gas clean, secondary refining and slag handling system. At the same time, the relevant parameters of each unite or system are being calculated. Main calculations include the converter furnace, the oxygen lance, the flue gas purification system, the calculation of workshop equipment and the calculation of cross-inter-span. In addition, slag splashing, hot metal pretreatment, secondary refining technologies, as well as the control of steel surface were taken to the international advanced level. The design finished the design specification paper, process plant layout drawing