双鸭山矿业集团东荣四矿1.2Mta矿井的设计(附全套CAD图纸).docVIP

全套设计CAD或三维图，联系QQ 695132052 各专业都有 摘要 本设计新井为双鸭山矿业集团东荣四矿1.2Mt/a的新井设计，共有3层设计可采煤层，平均总厚度为9m。设计井田的工业储量为177.8Mt。服务年限为73.2a。划分三个水平开采。井田平均走向长5500m，平均倾斜长2800m，煤层平均倾角13°，属于缓倾斜煤层。 本设计矿井采用双立井多水平开拓方式，水平共划分6个采区，其中达产采区1个，达产工作面1个。采用分组集中大巷布置方式,大巷采用10t架线电机车牵引3t底卸式矿车运输。辅助运输采用1.5t固定式矿车.本设计采区为荣二上，大巷装车式下部车场，综合机械化采煤。年工作日为330天，采用“四、六”式工作制，工作面长为195m，每刀进度为0.6m，每日割九刀。采用走向长壁后退式采煤法。提升设备为主井采用两对12t箕斗提升，副井采用刚性罐笼提升。矿井的通风方式为中央边界抽出式 关键词： 综合机械化 采煤工艺 走向长壁采煤法 Abstract The task of mine design is to construct a 1.2million tons new shaft for Shuangyashan Mine Administration.This mine has three minable Coal Seam,and its average thickness is 9 meters.Designed field of minable capacity is 177.8million tons. It can adapt for 73.2years, and is divided into three levels. Average alignment in farmland in well lengthways 5500 ms, average slant lengthways 2800ms, average rake angle in coal seam 13°, belong to the the slant the coal seam. This mine shaft is applied to double indined shaft development method; The adoption cent set concentrates the big lane arranges, The well farmland turns to is divided into totally 6 distrike and 1 working face. With a pair of concentration, big alley is arranged, big alley adopt the wiring type generator vehicle of 10t pull the transportation of 3t drop-bottom min car, with tape transportation oblique alley, connect every coal seam, the method of coal mining slope the wall of coal mining to incline. This worked fece is Ru 1 Shang worked face, words 330 days every year. Adapt “four-six” work situation, work face is 195 meters length of circle is 0.6 meters, and times is 9 one day.Because the well farmland slant length is bigger, and incline the coal seam for the , and coal seam geology condition etc. factor effects, deciding this well farmland inside the complete adoption slant. The main well adoption many rope rub the box promotes of 12t, the vice- well adopts the rigid combination a cage promotes.Well ventilated way that mineral well as the central being juxtaposed the draw