张力盘的落料冲孔拉深复合模设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘要 本设计主要阐述了张力盘的冲压模具结构设计。 设计首先简单分析了冲压成形工艺的发展情况和冲压成形的主要特点，以及冲压模具的主要结构特点。然后从张力盘的基本结构出发，分析其加工工序。结合工件的产量和模具设计的复杂程度，决定采用三套模具独立成形。第一套为落料、冲孔 、局部浅拉深复合模；第二套为腰形孔冲裁模；第三套为内孔外缘翻边模.在二维软件autocad的辅助下,设计出各套模具的主要结构.最后分析了模具装配的工艺技术要求和模具主要零件的加工制造情况,以及使用三维软件pro/e对模具进行实体设计与动画演示. 设计重点阐述了模具的结构设计过程。首先对模具进行工艺参数，主要工作部分刃口尺寸的相关计算，然后再利用得出的数据结合有关的参考资料和图册，对模具的主要零件进行结构设计，包括工作零件,定位零件,导向零件,卸料装置,顶件装置,压边装置等的设计.最后根据全部零件的结构设计选用合适的模座和模柄,并选用合适的冲压设备. 关键词：张力盘；冲压模具；复合模；冲裁模；翻边模 Abstract This design is major to have elaborated the stamping die structural design of tension plate. Design first simple analysed the stamping shape technology development condition and the major characteristic of the stamping shape, as well as the major structural characteristic of stamping mould. Then from the basic structure of tension plate, analyse its processing process. Combine the complex level of mould design and the output of workpiece , decide to become shape with 3 sets of mould independence. The first is the compound die to punch , punch hole and part deeply pull; The second is the cutting mould for waist shape hole; The 3th die is the upsiding down edges die of the hole outside reason and inside. In the help of the 2 dimension software autocads , devise the major structure of each set die. Have analysed use as well as the processing production condition of mould major element and the requirement of engineering technology of die assembly finally three-dimensional software pro/e for die carry out entity design and animation demonstration. Design is key to elaborat the structural design course of die. First carries out the technology parameter and the mainly work partial point sizes, then use the reference information and picture that reached , as the major element of die carries out structural design, include working element, location element, lead element and tripper carry installation , press the design of side installation etc.. Choose suitable die and die handle finally according to the structural