5000KN单臂液压机的液压系统设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 液压传动相对于机械传动来说是一门新技术，液压机是利用帕斯卡定律制成的利用液体压强传动的机械，广泛应用于各种工业中。而在液压机中液压传动系统是其非常重要的组成部分，对液压机的各种性能起到决定性的作用，至于它与微电子和计算机技术密切结合，得以在尽可能小的空间内传递出尽可能大的功率并加以精确控制，更是近几十年内出现的新事物。 本文为5000KN单臂液压机设计了液压传动系统，500T单臂校正压装液压机液压系统采用插装阀集成系统，动作可靠，使用寿命长，液压冲击小，减小了连接管路与泄漏点。独立的电器控制系统，工作可靠，动作直观，维修方便。采用按钮集中控制，设调准（点动）,单次（半自动）二种操作方式。大大的提高了传统液压机的控制有欠缺自动化、操纵性和安全性差等缺点。 它适用于轴类零件、型材的校正和轴套类零件的压装、板材零件的弯曲、压印、套形、简单零件的拉伸塑料制品、机床、内燃机、轻纺制造机械、轴类、轴承、洗衣机、汽车电机、空调电机、电器、军工企业、三资企业装配流水线等行业使用。 该设计主要包括在给定参数情况下液压系统零部件的参数计算，从而进行合适的选择，在根据实际情况确定液压元件（辅助元件）以及液压泵站和油箱，文章也附带了液压元件的安装说明及液压机的技术要求和液压机的驱动要求。 关键词：单臂液压机；液压系统 ；液压元件 Abstract Hydraulic transmission is a new technology compared with the mechanical transmission. The hydraulic press is based on the Pascal’s law and designed for producing heavy press. The hydraulic drive system is an important part in the hydraulic press system. And it is the fateful element for the techniques of hydraulic press system. When closely combing with microelectronics and computer technology, it is able to deliver as far as possible big power and precise control within as little space as possible, especially in recent years it is a new thing. This paper is designed for 5000 KN single arm hydraulic press hydraulic transmission system, 500t single arm correction hydraulic press hydraulic system adopts cartridge valve integrated system installation with the advantages to reliable, long service life, small hydraulic impact, reducing the connection pipe and the leak point. The Independent electric control system, has the advantages of the work reliable, intuitive, easy maintenance. With the using of centralized control buttons, alignment (or points) and single (semi-automatic) ,two kinds of operating mode, greatly improve the traditional hydraulic control with lack of automation, poor maneuverability and security flaws. It is suitable for shaft parts, profile correction and sleeve parts, bending, stamping of sheet parts installation, set of form, the simple components of