钢坯火焰清理机之钢坯输送系统设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 本次设计的主要内容有：传动方案的总体设计、电动机的选择、三角胶带传动设计、减速器的设计、联轴器的设计、锥齿轮传动设计及滚筒运输架等的设计。本次设计我采用了三角胶带传动，圆柱齿轮减速器及锥齿轮传动。 关键词： 电动机. 齿轮. 减速器. 轴承. 滚筒. Abstract The main contents of this design has:Spread to move the choice,triangle tape that project that total design,electric motor spread move the design,stalk that decelerate the join shaft ware of design, the subulate wheel gear spread to move the design and roller the conveyance the design for waiting.This design I adopted the triangle tape to spread to move ,and the cylinder wheel gear decelerate the machine and subulate wheel gear to spread to move. Keywords: Electrpmotor. gear wheel. Reducer. Axletree. Platen. 目 录 中文摘要······························································································1 ABSTRACT·························································································1 第一章 总体方案设计··········································································2 第二章 电动机的选择··········································································4 第三章 三角胶带传送设计··································································5 第四章 减速器设计·············································································7 第五章 联轴器选择·············································································20 第六章 锥齿轮传动设计······································································21 第七章 小锥齿轮设计及轴承座设计···················································24 第八章 滚筒、滚筒轴及配件的设计···················································25 致谢······································································································27 参考文献······························································································28 附录一 滚筒运输机机架部分示意图···················································29 附录二 英文技术资料及中文翻译·······················································3第一章 总体方案设计 驱动式滚筒运输机的原动机选用电动机。因为滚筒的转速为：n5=V/πD （D为滚筒直径），初步选取滚筒直径为D=380mm，