基于PLC的电梯控制系统设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 基于PLC的电梯控制系统设计 摘 要 本文介绍了电梯在七层建筑中的工作过程,PLC控制系统的硬件及软件，着重分析了电梯的自动平层、开关门、平层、层楼显示等梯形图的研究。随着我国经济的高速发展，微电子技术、计算机技术和自动控制技术也得到了迅速发展，电梯技术的可靠性越来越高，已经进入了一个崭新的时代，其应用越来越广。电梯作为现代高层建筑的垂直交通工具，与人们的生活紧密相关，随着人们对其要求的提高，电梯得到了快速发展，其逻辑控制也由PLC代替原来的继电器控制。电梯采用了PLC控制,用软件实现对电梯运行的自动控制，可靠性大大提高。控制系统结构简单，外部线路简化。另外可方便地增加或改变控制功能。 将可编程序控制器(PLC)应用于7层电梯进行逻辑控制，大大提高了电梯可靠性、可维护性以及灵活性，延长了使用寿命，同时缩短了电梯的开发周期。The elevator control system based on PLC ABSTRACT Introduced in the seven layers of elevator work process and PLC control hardware and software of the system are analyzed, and the automatic sliding layer, elevator opened and closed, floor of the study showed ladder diagram. Along with the rapid development of Chinese economy, microelectronics technology, computer technology and automatic control technology is rapidly developing, the reliability of the technique for elevator, has entered a new era, the more and more wide application. As a modern high-rise building of elevator traffic tools, vertical is closely related to peoples lives, with people to improve their requirements, elevator has been developed rapidly, the logic of PLC control also replace original relay control. Elevator adopts PLC control, use software to realize the automatic control of elevator running, reliability, improve greatly. Control system structure is simple, external circuit simplified. Another can easily add or change control function. Will programmable logic controller (PLC) is applied to 7 elevator for logic control, and greatly improve the flexibility and reliability, maintainability, and prolong the life, and shorten the development cycle of the elevator. PLC system is the core of the system, all kinds of elevator signal to PLC, then sent by PLC control signal and instructions for door control signal devices and control of elevator to the floor monitor PLC operation state, according to the input signal and call for signals place elevator running direction can be determined, the elevator, after the arrival