灌装生产线灌装阀的设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 毕 业 设 计论 文 任 务 书 一、题目及专题： 题目　　 　　 、专题　 　 二、课题来源及选题依据 三、本设计（论文或其他）应达到的要求： ① ； ② 详细的了解灌装机的全局机构和布置； ③ 详细的了解灌装机的传动机构，以及拨瓶机构的传动机构； ④详细的了解灌装阀工作的原理，灌装阀的组成，以及灌装阀工作时的各个步骤； 四、接受任务学生： 五、开始及完成日期： 自20年月日 至201年5月日 六、设计（论文）指导（或顾问）： 指导教师　　　　　　　签名 签名 　　　　　　　签名 教研室主任 　　　　　　〔学科组组长研究所所长〕　　　　　　　签名 　　 　　系主任 　　　　　　签名 摘 要在排气通道设有,用来安装压紧螺母 ，阀可以通过调节螺母和压紧螺母调节弹簧的张力和阀体尺寸，用来调节灌装过程中一些小的光装误差，本发明在于灌装完成后能及时停止灌装,灌装精度高,节约能源,且液体灌装阀结构简单。Abstract In this the sis, the layout and arrangement of the liquid filling production line filling valve design, and liquid filling rotary filling machine. The structure of the liquid filling valve is the upper part of the valve body to the lower part of the liquid inlet valve in the liquid outlet, and exports and filling the first part has a sealing device through the squeeze pressure with sealing device contact, the upper part of the valve body set exhaust pipes, one end of the exhaust pipe extending from the valve body inside through the liquid outlet and filling heads connected together and the other end extending liquid with an external Unicom thus excluding gas, liquid filling valve is turned on. the valve element of an upper liquid inlet and a lower liquid outlet will form a liquid passage such that the liquid from the channel into the outer diameter of the bottle body, the maximum size of the filling head with larger than the maximum size of the fluid channel, and the sliding body alignment can to avoid the process of filling the hydraulic force the formation of a large number of foam filling accuracy and efficiency, is installed in the exhaust channel compression nut at a thread, used to install the compression nut, the valve can be pressed by adjusting nut and nut to adjust the spring tensio