滚筒式绞车的总体设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 摘 要 滚筒式绞车是结合了提升绞车JT0.8 ×0.6型号的技术参数以及调度绞车JD-11.4行星齿轮传动结构来设计的。目的是使此提升绞车能在节省空间的条件下完成较大的传动比的要求。目前，很多提升轿车都向着标准化、体积小、重量轻、结构紧凑、高效节能、寿命长、噪音低、一机多能、大功率、外形简单等方向发展。因此，使得我们需要在结构上对提升机进行改进，而调度绞车的行星齿轮传动对此改进将会起到很大的作用，因为行星轮传动具有较大的传动比、高效、噪音小、结构紧凑等特点，刚好可以满足上述要求。因此，我的毕业设计“滚筒式绞车”就是对两种绞车在结构和性能上的综合，使其达到最优的设计效果，具有所需的功能。 本次设计主要对两级啮合传动和 关键字：滚筒式绞车 提升绞车 调度绞车 行星齿轮 Abstract The roller type car is a technique to joins together to promote the winch JT0.8*0.6 model numbers parameter and adjust a degree the winch planet JD-11.4 wheel gear spreads to move the construction to design of.The purpose is a request to make this promote winch can complete while saving the spatial term bigger spreading move the ratio.Current,a lot of promote the winch all the facing standard series turns,the physical volume is small,the weight is light,construction tightly packed,economize on energy efficiently,the life span is long,low noise,a machine can much,big power,shape etc.direction development.Therefore,make us needing on the construction to promote the winch proceed the improvement,but adjusts a very big function,because the planet wheel gear spreads to move to have the very big spreading moves the ratio,efficiently,the noise is small,the characteristics of the construction tightly packed,can satisfy the above request at the right moment.Therefore,my graduate design roller type winchg is to two kinds of winches to go forward with the function at the construction the line synthesizes,making its attain the superior turning. The design of the two main transmissions and meshing with a planetary gear transmission, the drum structure, such as brake carried out a detailed design. Key word：the roller type winch promote the winch adjust a winch improvement 目 录 前 言 1 第一章 概述 2 1.1、绞车的发展 2 1.1.1 我国绞车的发展 2 1.1.2 国外绞车的发展 2 1.1.3 国内外水平对比 3 1.1.4 总体发展趋势 4 1.2 提升绞车简述 4 1.3 调度绞车简述 5 1.4 滚筒式绞车设计思路 5 第二章 滚筒绞车总体结构设计方案 7 2.1 总体设计方案 7 2.2 系统概述 7 第三章 局部方案设计 9 3.1 驱动形式 9 3.2 减速箱的选用 10 3.3 传动方案 10 3.4