威驰轿车的教学改装毕业设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 摘 要 随着汽车工业的发展，汽车的控制正从机械控制向电子控制时期发展，电子技术在现代汽车中得到广泛应用。本实验台研发设计的目的是辅助汽车教学，方便学生了解汽车电控系统与单片机控制技术相结合的原理，培养学生的工程实践能力。实验台的制作以从威驰发动机上所采的数据流为依据, 对丰田系列车型具有针对性。 设计的主要特点是信号控制，通过在传感器与ECU之间设置开关，用于控制传感器信号,从而实现控制系统信号测试分析。形象直观发动机舱内安装了仪表，控制柜上有数据显示，车门剖面结构紧凑，功能演示形象直观。实验台的主要功能是可以检测汽车电脑是否正常工作，并且可以用专用诊断仪器读取有关数据流，查找汽车电脑的故障。可以模拟发动机电控燃油喷射、点火，满足汽车实验教学要求，操作简便。 关键词：电子控制；信号模拟；电控燃油喷射；剖面；传感器 ABSTRACT Along with the development of automobile industry, the control of automobile is developing from the mechanical-controlled to electronic-controlled period, Singlechip Electrical technology gets extensive application in modern automobile. The researching and development purpose of the experiment table is to assist teaching, it will make students convenient to know about the principle of mutual interlock between automobile electronic-controlled system and Singlechip controlled technology. It also can culture students’ ability of engineering practice. The development of the experiment table is according to the data stream that received from the VIOS engine, and it directed towards Toyota automotive type Main feature is signal imitation the sensor and ECU provided between the sensor used to control signals, testing analysis. the signal control system,visualizestart within the cabin, there is information on the control cabinet, according to the door of its compact structure, functions, visual in image shows.major function is it can not only check that whether the ECU is working normally or not but also read correlative data stream by special diagnosis instruments. Moreover, it can find ECU’s faults.it can imitate electronic-controlled fuel oil injection and ignition as the engine and its operation is simple. so it can meet the needs of teaching. Key word: Electronic-controlled；Signal imitation；Electronic-controlled fuel oil injection；Section；Sensors  目 录 摘 要 I Abstract II 第1章 绪 论 1 1.1引言 1 1.2课题研究的背景与意义