杏（花生）仁脱皮机毕业设计（含CAD图纸全套）.doc

买文档后送图纸，QQ 194535455 目录 中文摘要、关键词 1 英文摘要、关键词 2 引言 3 第1章 综述 4 1.1 杏（花生）仁脱皮的意义 4 1.2 脱皮的方法及原理 4 1.3常用果仁类脱皮机几种机型比较 6 第2章 结构设计及分析 8 2.1 传动系统的确定及结构设计 8 2.2 上料的结构设计 10 2.3 摩擦副机构的设计 10 2.4加工后杏（花生仁）仁收集 12 2.5机架选择 12 第3章 设计的计算与校核 13 3.1电动机选择 13 3.2计算总传动比及分配各级的传动比 14 3.3传动装置的运动参数及动力参数的计算 14 3.4 V带传动的设计计算 14 3.5减速器的选用 16 3.6 滚子链的传动设计计算 16 3.7卷筒主动轴的设计计算 17 3.8卷筒从动轴的设计计算 20 3.9 滚动轴承的选择及校核计算 21 3.10 键联接的选择及校核计算 22 第4章 机器使用说明书 23 4.1用途 23 4.2对去皮后果仁的要求 23 结论 24 致谢 25 参考文献 26  杏（花生）仁脱皮机的设计 摘要：杏仁脱皮机主要就是将经过浸泡的杏仁进行食品和饮料生产前期的脱皮处理。将经过热水浸泡的杏仁倒入脱皮机料斗中，经脱皮胶圈摩擦脱皮，经过分离装置将皮米自动分离后排出。与电机的选型配套，设计与布置，强度校核以及密封装置的选择具有运转平稳、、维修方便该机用于杏仁原料的初加工或者用于食品、杏仁罐头、杏仁鲜菜、饮料制品和杏仁露的加工。设计与布置The Peeling Machine Design of Almond（Peanuts） AbstractAlmond peeling machine is mainly is to soak the almonds through the food and beverage production for pre-peeling treatment.After immersion in hot water will be poured into almond peeling machine hopper, apron friction by peeling peeling, after a separation device to Pico automatically discharged after separation.The design of the peeling machine is to use linear motion friction peeling method, almonds and peanuts and the like peeling nuts.Its characteristics: small machinery, simple structure; easy to manufacture, easy to operate, low cost; on the production conditions do not ask. Peeling some of the motor through the selection of matching, selection and check of rolling bearings calculation, drum driven shaft design calculation, the transmission roller chain design and calculation, transmission of the motion parameters and dynamic parameters of the calculation, speed reducerselection, structural design and layout, and the strength of the choice of checking and sealing device, so that peeling machine is running stable, low cost, easy maintenance.The machine will be used in the initial processing of raw almonds or for food, canned almond, almond fresh vegetables, beverages processing products and almond dew Key words: Peeling machine ；Friction peeling；Structural design and decora