机械制造及自动化专业毕业论文--儿童推车手把疲劳试验机设计1.docVIP

摘 要 经调研，目前国内外还没有进行儿童推车把手强度疲劳性测试的专门设备。个别试验机构儿童推车安全测试设备均为自制设备，这些设备的功能单一，适用性能差，设备的利用率低下。本课题争对常规的儿童推车把手强度疲劳性测试，具有自动化程度高，产品定型化，有较强的经济性，有利于广泛推广。童车是现在人们生活中必不可少的用品之一，儿童推车在带来方便的同时，也会给婴幼儿带来伤害，为此世界各国和地区均制订了严格的安全性能标准，以最大限度地为婴幼儿提供安全的儿童推车产品。其质量的合格与否直接影响到儿童的安全。所以本课题主要针对现实生活中人们对童车的安全性的考虑设计了用于试验童车把手疲劳强度的试验机。本课题主要根据检测标准，设计一个童车把手强度疲劳试验机，该试验机以童车把手试验对象，夹持童车把手，让童车再受控的方式下，交替抬升或降低把手以使前轮和后轮依次抬高，直到童车把手破坏或达到规定试验时间为止。设计要求设计的试验机能按照试验标准要求进行连续运行。 关键词：童车，把手，疲劳，试验机，强度校核。 Abstract Accroding to the research, there is no specialized testing equipment for children vehicles handle fatigue strength at home and abroad at present. Some test body safety test equipment cart children are home-made devices, these devices feature a single, poor application performance, lower utilization of equipment. The issue of children struggle to conventional cart handle fatigue strength of the test, with a high degree of automation, product stereotypes, have a stronger economy, is conducive to promoting broad. Childs vehicles is now living in one of the essential supplies, children in the convenience of a cart, will bring harm to infants and young children, for all countries and regions have developed a stringent safety performance standards, The maximum for the infant children cart to provide a safe product. Qualified or not the quality can directly impact on the safety of children. So the main issue for people in real life Childs vehicles on the safety of the design considerations for the pilot Childs vehicles handle the fatigue testing machine. The main topics under testing standards, the design of a Childs vehicles grip strength fatigue testing machine, the testing machine to handle subjects Childs vehicles, Childs vehicles gripping the handle, then let Childs vehicles controlled manner, lifting or lowering the turn of the handle so that Front and rear wheels were raised, hands until Childs vehicles damaged or reach the required test of time. Design requirements for the design of the pilot test function in accordan