ESYS安装步骤.pdfVIP

Installing E-SYS These instructions will show you how to properly set up E-SYS on your PC so you can program your BMW. I take absolutely no responsibility for your actions; these are simply the steps I followed which resulted in a successful setup on my PC and I have been able to make multiple customizations to my 535’s VCM. Good luck and enjoy! Downloading the Files 1) You need the following files on your PC before getting started: 2) They should all be downloaded into the same place/folder . 3) All of these files are posted here: /forums/showpost.php?p=6872908postcount=1 RAR Extractor Once the files are downloaded, you will need an extractor utility installed on your computer. I used WINRAR and it worked just fine: /free-download?gclid=CMfO657N0LACFQYKKgodNQ4VXg Note that the link above is for 32-bit operating systems; if you have a 64-bit system, there is a version for that which will result in slightly better performance. Once you have downloaded all the files and RAR Extractor, you are ready to begin installation of E-Sys. E-Sys Application Installation 1) Find the location of your files on your PC and open the window. Do yourself a favor and make sure they are ALL there: 2) Open the E-Sys_EST_PIN file. Depending on the RAR extractor you have installed, it should open in that application. 3) Double-click on the very last file, E-Sys_Setup.exe. WINRAR will begin extracting: 4) Once the extraction is complete you should get a window like the below. Click “Next:” 5) It will ask for a password. Enter “lo8F3lsVVg” into the field. 6) You’ll then get this dialogue box to specify where the program installation will reside on your PC: In most installations, you probably don’t even need to customize. I just left the default location. 7) Next, you’ll get this dialogue box to specify the data files. Again, it’s doubtful you’ll need to customize: 8) A