机箱加工自动线回转工作台及液压系统设计.doc

机 械 工 程 学 院 毕业设计说明书(论文) 专 业：机械设计制造及其自动化（流体传动与控制） 题 目：机箱加工自动线回转工作台及液压系统设计 毕业设计说明书（论文）中文摘要 本次毕业设计的内容是为一条专门加工箱体的自动生产线设计一台转位台，即当工件两面加工完成时，不需要拆卸便可自动使工件转位来加工工件的另外两面。并且该回转工作台是采用液压系统来驱动，其中的液压装置部分采用叠加阀型式的系统。这样一方面能提高工件的加工精度，另一方面能明显减少加工时间，提高劳动生产率。且采用液压系统工作稳定可靠。 由于此次设计的内容包括回转工作台和液压系统两大方面，所以设计的前期主要完成的是组合机床部分，具体的工作量是机床加工的参数计算和 “三图一卡”的绘制，即被加工零件的工序图、加工示意图和回转台总装配图。设计的后期则进行液压的部分的工作，本设计中绘制的是比较新颖的由叠加阀所构成的系统原理图，另外还完成了液压泵站总装配图和阀块的设计与绘制。 关键词 自动线 回转工作台 液压系统 叠加阀 毕业设计说明书（论文）外文摘要  Title Automatic production line for chassis rotary table and hydraulic system design Abstract The graduation project is a specialized processing cabinet automatic production line design a transposition table, that is, when both sides of the workpiece machining is completed without removing the workpiece can be automatically transferred to the processing of another bit on both sides of the workpiece. And the rotary table is driven by hydraulic system, which uses hydraulics partly superimposed valve type system. So that one can improve the precision of the workpiece, on the other hand can significantly reduce processing time and improve labor productivity. And the use of a hydraulic system is stable and reliable. Since the content of this design include two aspects rotary table and hydraulic systems, the design of the early completion of the main part of the machine is a combination of specific workload is calculated machining parameters and the three-figure one card drawing, which is a process diagram machining parts, machining diagrams and turret assembly drawing. Working late in the design of the hydraulic part, this design is a system diagr