RL5200XYK翼开启厢式汽车改装设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 翼开启厢式汽车是一种能适应现代物流发展需要的新型运输车型,将会有广阔的市场前景。 关键词：专用汽车；翼开启厢式汽车；车厢；改装设计；ANSYS ABSTRACT Wings open the van is a vehicle to adapt to the new needs of modern transport logistics development models, will have broad market prospects. The most notable feature of loading and unloading efficiency. Currently, there are a lot of special vehicle manufacturers to produce such models, the promotion of wing opening van car can greatly make up for van loading and unloading general lack of low efficiency, shorten cycle times, lower transportation costs, the development of the national economy has important significance.  This paper introduces the total mass of the wing open 20t conversion van car design specification. On the car, open the door wing, wing doors operational agencies, wing doors mechanical locking mechanism, hydraulic system, and take a detailed design of power system, and a comparative analysis of different options to ensure that the wings open the van and utility vehicle advanced nature of the car chassis and top shelf support beams of solid modeling and ANSYS, ensuring the design is reasonable. Described in the modified car during wing opening van prone to problems and works related equipment, and vehicle performance is analyzed.  Key words: Special Vehicle; Wing Opening Box Van；Car; Design Modifications；ANSYS 目 录 摘要 I Abstract II 第1章 绪论 1 1.1 改装翼开启厢式汽车的目的和意义 1 1.2 国内外现状及发展前景 1 1.2.1 国内外发展现状 1 1.2.2 翼开启厢式汽车的发展前景 2 1.3 翼开启厢式汽车的特点 3 1.4课题主要内容 3 1.4.1 设计内容 3 1.4.2 技术路线 3 第2章 总布置方案及二类底盘选型 5 2.1 整车总布置 5 2.1.1 翼开门形式方案 5 2.1.2 方案分析与选择 7 2.2 二类底盘选型 8 2.2.1 二类底盘选择方案 8 2.2.2 二类底盘初选 8 2.2.3 所选底盘具体参数 9 2.3 本章小结 10 第3章 车厢设计 11 3.1 车厢尺寸参数的确定 11 3.1.1 车厢外廓尺寸 11 3.1.2 车厢内框尺寸 11 3.2 车厢结构与设计 11 3.2.1 车厢骨架结构设计 11 3.2.2 蒙皮的设计 20 3.3 车厢门、密封条的设计 20 3.3.1 车厢后门的设计 20 3.3.2 密封条的设计 21 3.4 车厢设计校核 21 3.4.1车厢质量 21 3.4.2 使用ANSYS12.0对车厢底架静态分析 22 3.4.3 使用ANSYS对车厢顶架支撑梁静态分析 24 3.5 本章小结 26 第4章 液压系统设计与取力系统布置 27 4.1 液压控制系统设计 27 4.1.1 工作原理 27 4.1.2 液压系统原理布置 27 4.2 液压缸选