开滦集团荆各庄矿1.2Mta新井设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为矿万t/a新井设计。煤矿位于省交通便利井田南北长约，东西长约，井田总面积为2。主采煤层为号煤、号煤，平均倾角为，煤层平均总厚为m。井田地质条件较为简单井田工业储量为万t，矿井可采储量。矿井服务年限为a。矿井正常涌水量为m3/h，最大涌水量为m3/h。矿井瓦斯涌出量较低，为低瓦斯矿井。 井田划分为两水平，第一水平标高为m，第二水平标高为m，双立井开拓，主井箕斗，副井装备罐笼。大巷采用胶带运输机运煤，辅助运输采用。矿井通风方式为式通风。 矿井年工作日为30 d，工作制度为“”制。一般部分共包括10章：1.矿区概述及井田地质特征2.井田境界和储量3.矿井工作制度及设计生产能力、服务年限4.井田开拓5.准备方式-带区巷道布置6.采煤方法7.井下运输8.矿井提升9.矿井通风与安全技术10.矿井技术经济指标。专题部分题目是。综采放顶煤翻译部分主要内容为关于。GCDSS其主要功能包括矿井特征描述的整合作用、数字的模型、危险评估和再调整技术的选择，为今后的实现绿色开采提供了一种新的技术支持。 关键词：新井设计 ；综采放顶煤 ；胶带运输机 ；大倾角 ABSTRACT This design consists of three parts: the general part, the special part and translated part. The general part is a new design of JingGeZhuang mine, 1.2Mt/a. JingGe Zhuang mine lines in Northeast of TangShan in HeBei province. The traffic of road and railway is very convenience to the mine. The N-S of the minefield is 3.5 km ,the W-E is about 3.4km，the area is 9.0㎞2.The coal seam and 12# coal seam is the main coal seam, and its dip angle is 14 degree. The thickness of the mine is about 16.12m in all. The geological structure of this area is simple. The proved reserves of the minefield are 19172 million tons. The recoverable reserves are 6418.27 million tons. The designed productive capacity is 12 million tons percent year, and the service life of the mine is 40 years. The normal flow of the mine is 223.8 m3 percent hour and the max flow of the mine is 570 m3 percent hour, and the gas of the mine is low gaseous mine. The minefield is divided into two levels, the first level of -375m elevation, elevation to the second level -570m. Shaft open up a two-level subinclined shaft extends two levels, the main shaft using skip upgrade equipment belonging cage. Roadway used to transport coal belt conveyor, auxiliary transport using narrow-gauge railway transport with tub. Mine ventilation central border ventilation. The working system “three-eight” is used in the JingGeZhuang mine. It produced 330d/a. This design includes ten chapters: 1.An