喷墨打印机盒盖注塑模具设计【优秀机械专业论文】【全套带CAD图】.docVIP

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 本科毕业设计(论文) 题目：系 别： 机电信息系 专 业： 机械设计制造及其自动化 班 级： 学 生： 学 号： 指导教师： 2013年05月 Ink jet printer cover injection mold design Abstract This design is the design of injection mould for the cabinet. The design uses two mold cavity, type of the sprue is latent gate, the parting surface is chosen in the maximum section of the plastics. After plastics are molded， molding products are driven by putting from dynamic model,then using reset stem returned. In the design ,The need to calculate the size design, determine the size precision, the preliminary selection and the injection machine. And the injection molding machine of gating system, forming part of the structure, forming part of the size, mold release mechanism, exhaust system, temperature control system design and calculation. And to check the injection machine parameters, including the thickness of mold closing, mold installation size, mold opening stroke, the clamping force injection molding machine etc.. All the parameters meet the requirements to determine the type of injection machine. In the design process, in order to express more clearly the internal structure of the mold, so a moving die insert, fixed die insert, the fixed mould push plate 2D part drawing and 3D map explosion. Keywords：?Cabinet;Parting;surface;Runner;Process analysis 主要符号表 额定锁模力 模腔压力 安全系数 最小模具厚度 最大模具 塑件尺寸误差 塑料的最大收缩率 塑料的最小收缩率 塑件尺寸 塑料的平均收缩率 塑料的公差 模具制造公差 型腔许用变形量 型腔材料的弹性模量 型腔材料的需用压力 脱模斜度 摩擦系数 脱模力 推杆长度系数 总脱模力 应力 屈服极限 目 录 1 绪论……………………………………………………………………………1 1.1 题目背景………………………………………………………………………1 1.2 题目国内外相关研究情况……………………………………………………1 1.2.1 国内研究的情况…………………………………………………………1 1.2.2 国外研究情况……………………………………………………………2 1.3中国与国外先进技术的差距…………………………………………………2 1.4塑料模具发展走势……………………………………………………………2 2 产品分析