气缸体专用平面磨床设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 摘 要 用磨料磨具（砂轮、砂带、油石和研磨料等）为工具进行切削加工的机床，统称为磨床，它们是因精加工和硬表面的需要而发展起来的。随着机械产品精度、可靠性和寿命的要求不断提高以及新型材料的应用增多，磨削加工技术正朝着超硬度磨料磨具、开发精密及超精密磨削（从微米、亚微米磨削向纳米磨削发展）和研制高精度、高刚度、多轴的自动化磨床等方向发展[4]，如用于超精密磨削的树脂结合剂砂轮的金刚石磨粒平均半径可小至4μm、磨削精度高达0.025μm。 本课题是对设计一台气缸体表面加工用的专用磨床，气缸体作为重要的工艺要求精密的零部件，其外表面的粗糙度一直是制约产品质量的一个瓶颈问题，如何能使气缸体的表面粗糙度和平面度达到技术要求。 关键词：磨床；平面磨床；专用磨床；磨削加工；气缸体 ABSTRACT Abrasives (grinding wheels, abrasive belt, Whetstone, and abrasive, etc.) as a tool cutting machine tools, collectively known as the grinder, they are developed due to the need of finishing and hard surfaces. With mechanical precision, reliability and lifetime requirements of continuous improvement and increased application of new materials, grinding technology is moving in the ultra-hardness of abrasives, the development of sophisticated and ultra-precision grinding (grinding to micron, submicron nano-grinding development) and the development of high accuracy, high stiffness, and multi-axis automation grinder direction [4], such as for ultra-precision grinding resin combined with the average radius of the diamond grit grinding wheel can be as small as 4μm, grinding accuracy of up to 0.025μm. This topic is a special grinder, with the surface finish of the design of a cylinder block and cylinder block as an important process requirements of precision parts, the outer surface roughness has been a bottleneck restricting the quality of products, how to make the cylinder block. surface roughness and flatness of the technical requirements. Key words: grinder; surface grinder; special grinder; grinding; cylinder block 目 录 摘 要 I ABSTRACT II 第1章 绪论 1 1.1 磨床的类型与用途 1 1.1.1 磨床的类型及其特点 1 1.1.2 磨床的用途 1 1.1.3 平面磨削和端面平面磨床 2 1.2 磨床的现状及其发展趋势 4 第2章 总体结构设计 6 2.1 基本参数和设计内容 6 2.2 磨床总体设计 6 2.3 总体设计注意事项 6 第3章 磨床总体布局设计 7 3.1 加工零件 7 3.2 初步估计组成部分 7 3.3 总体布局初步设计 7 3.4 纵向与横向尺寸的确定 7 3.5 砂轮架相关尺寸设计 10 3.6 头架相关尺寸的确定 12 3.7 尾架相关尺寸的确定 13 3.8 工作台 13 3.9 横向进给机构 13 3.10 砂轮修整器 13 3.11 液压系统 13 3.12 电气部分 13 3.13 机床保护系统 14 第4章 部件设计（砂