汽车弹簧液压弯管机的设计【优秀机械专业论文】【全套带CAD图】.doc

精品机械毕业设计 答辩CAD图纸资料 优秀通过答辩 汽车弹簧液压弯管机设计 摘要 在汽车弹簧生产工艺中，卷耳包耳工序是关键。单工位弯耳机是对汽车钢板弹簧主板进行切头弯耳一次成型的液压设备。首先，文中提出了几种钢板切头弯耳的可行性方案以及工艺措施，并进行了分析、比较、论证，选出最佳方案。其次，确定出单工位液压弯耳设备主要需要的机构及运动，并选定出各自具体的运动结构方案。再通过以上分析、考虑，综合确定出设备的总体运动结构方案。利用所给有关数据，对设备的各个机构进行动力、运动设计计算，确定各机构的尺寸。绘制总体装配图及部件图，确定本设备的布局尺寸，设计出达到要求的汽车钢板弹簧的单工位液压弯耳。而且在最后对整个设计工作进行总结、归纳，对部分设计问题进行分析说明。 关键词：液压设备　弯耳机 单工位弯耳机 Abstract Bending is the key in the plate spring production.This description is a general design and elucidation relevant to automobile steel plate bending machine what is used as cutting-out the head of the plate spring and bending the plate spring. Designed in the description is a single working hydraulic plate bending equipments. First, in this description, it raised several executable programmers and posed several technological specifications to product the automobile plate spring. And then we proceeded to compare and argued the programmers. Be virtue of the argument, we selected the best project. Then make sure the main requirements of the machines and sport construction of the single working hydraulic plate bending equipments, and definitude the specific structures. Then we were virtue of these researches, and combined various opinions, we made selection out concretely the project again. Sum up the above analysis and consider again, synthesize to make sure the total sport construction of the equipments and the project. Then we can be virtue of the parameter and refer to the reference book, make use of an each organization for count, we proceed to design and calculate of the motive power and sport movement of the equipment, and make sure the size of each organization. Then we drafted the general assembly diagram and parts assembly diagram of this equipment, certain this equipments attain the requests that we needed to product the spring. At finally proceeds to whole design work, and we can get the equipment of the simplex working bending machine of the automobile spring. Key word: Hydraulic equipment Ben