一种简易线结构光投影三维形状获取方法.pdfVIP

ISSN 1000-9825, CODEN RUXUEW E-mail: jos@ Journal of Software, Vol.17, Supplement, November 2006, pp .176−183 http://www.j © 2006 by of Journal of Software. All rights reserved. Tel/Fax : +86-10 ∗ 一种简易的线结构光投影三维形状获取方法 + 郑作勇 , 姚 莉, 姚婷婷, 马利庄 (上海交通大学 电子信息与电气工程学院,上海 200240) A Simple Method for Shape Recovery Based on Linear Structured Light + ZHENG Zuo-Yong , YAO Li, YAO Ting-Ting, MA Li-Zhuang (School of Electronic Information and Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, China) + Corresponding author: Phn: +86-21 Fax: +86-21 E-mail: oliver .zheng@, Zheng ZY, Yao L, Yao TT, Ma LZ. A simple method for shape recovery based on linear structured light. Journal of Software, 2006,17(Suppl.):176−183. /1000-9825/17/s176.htm Abstract: This paper aims at recovering the shape of an obje ct by using a common LCD projector and a digital camera. The projector is employed as a point light source for casting linear stripe onto the surface of an object. From the sequence of photos taken by a digital camera, the shape of an object can be recovered. In this paper, a method for projector calibration is proposed on the basis of camera calibration. In addition, a RGB linear structured light scheme is also proposed for recovering the shape of an object with complex color and texture. The experimental results show that dense point clouds can be obtained for further surface reconstruction. It can be concluded that such a system cheap but keeping relatively high accuracy can be considered as a replacement of expensive scanning