旋转型灌装机设计（含CAD全套图纸）.docVIP

摘 要 在科学技术日益发展的今天，灌装行业越来越受到人们的关注。灌装行业的发展直接影响到液体灌装的精度，精准的灌装量不仅体现了灌装机械的发展水平，也是对消费者权益的一种保护。 本次设计的灌装机主要适应用矿泉水、果汁以及纯净水等无气液体的灌装，它具有操作简单、成本低廉及可批量生产等特点，可适用于一些中小企业的灌装生产。它的主要机构有一下几个：供料装置、供瓶装置、托瓶机构、瓶高调节装置以及灌装阀，此外，它的正常运转还需要靠传动系统的带动。它基本的设计方案是：灌装整体布局是呈立式、旋转型，由洗瓶器出来的瓶子通过传送带传送给供瓶装置，由它分瓶、送瓶给托瓶机构；灌装机的液箱内安装有灌装阀，阀头的喇叭口对准了每一个待灌瓶，液箱内的液体由供料装置供给，液体经供料装置供到液箱中，再通过灌装阀流入每一个空瓶内；待瓶灌满后，再由供瓶装置的星形拨轮拨到传送带然后传送出，运送到下一个工序。 本文从灌装机的基本理论、基本工作原理、基本工作结构以及传动部分的设计上作了阐述，并利用UG软件绘制三维图，从而更直观的反应整体效果。 关键词：灌装机；灌装阀；星形拨轮；传动装置； Abstract Today, with the development of science and technology , the filling industry has been paid more and more attention. The development of filling industry directly affects the accuracy of liquid filling ,the filling precision not only reflects the development level of the filling machine, but also is a kind of protection of the rights and interests of consumers. The design of the filling machine is mainly adapted to use for mineral water, fruit juice and water without liquid filling of gas.It has the advantages of simple operation, low cost and mass production characteristics .The filling production can be applied to some small and medium- sized enterprises of filling production. It has some main institutions,such as feeding device, the bottle supply device, bottle table institutions, the bottle of high regulator device and the filling valve. In addition, its function also needs to be driven by the drive system.The following is its basic design scheme . Its overall mechanism is vertical and rotary. The bottle which comes from washing device conveys through the conveyor belt transmission to the bottle supply device.The device can let the bottle be separated,and then send these bottles to bottle table institutions;The liquid filling valve is installed in the cabinet, and its valve head is admitted to each bottling. The liquid in the liquid box is supplied by feeding device,and then it is delivered through the filling valve to each empty bottle. After the bottle is filled, t