钢中_111_112_再结晶织构形成.pdfVIP

30 3 Vol . 3 0 No . 3 2 0 0 9 6 TRANSACT IONS OF MATERIALS AND HEAT T REATMENT June 2 00 9 {111} 31124 1 1 1, 2 3 杨 平, 李志超, 毛卫民 , 赵子苏 ( 11 , 100083 21 , 100083 31 Haas School of Business, University of California, Berkeley, CA94720- 1900, USA) : X IF , { 111} 31124, { 111} 31124, : X : TG 11117 TG 14612 : A : 1009- 6264( 2009) 03-0046- 07 Formation of the { 111} 31124annealing texture in steels 1 1 1, 2 3 YANG Ping , LI Zh-i chao , MAO We-i min , ZHAO Zi-su ( 11 School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China 21 State Key Laboratory for Advanced Metals and Materials, University of Science and T echnology Beijing, Beijing 100083, China 31 Haas School of Business, University of California, Berkeley, CA94720- 1900, USA) Abstract: Rolling and annealing textures were determined in IF- steel, low carbon steel and silicon steel by X-ray diffraction techniqu e. The nu cleation mechanism of the textures w as discussed based on literature. Special emph asis w as laid on the form ation of the { 111} 31124 annealing texture and its influencing factors because of the signif icance f or its control in three types of steels. Results show that the texture component is f avored by large rolling reduction and the presence of substitute alloying elements and is suppressed by carbon and precip itates. Key words: steel texture rolling recrystallization X-ray technique IF ( 08Al ) ( , , { 110 } 30014 ) , / 0{ 111} 3112 4(