海水淡化轴向柱塞泵静压支承滑靴副流固耦合分析.pdfVIP

45 11 浙 江 大 学 学 报() Vol.45 o. 11 2011 11 Journal of Zhejiang University ( Engineering Science) ov. 2011 DOI: 10.3785/j.issn. 1008-973X.2011. 11.001 翟 江, 周 华 ( , 310027) : , ., , , .:, ; - , ; ,. : ; ; ; : TH 322,TH 137. 51 : A : 1008-973X( 2011) 11-1889-06 Fluid- solid coupling analysis for hydrostatic supporting slipper pair of axial piston pump for seawater desalination ZHAI Jiang, ZHOU Hua (StateK ey Laboratory of Fluid Power Transmission and Control, Zhej iang University , angzhou 310027, China) Abstract : T hemicro deformation of the slipper body affects the load carrying ability of the hydrostatic sup- porting slipper pair. In order to study on it, the seawater lubricated slipper pair of the axial piston pump for seawater desalination was designed based on classic hydrostatic theory. After that the structure-fields of the slipper body and flow-fields of the slipper pair were calculated based on fluid-solid coupling method, and the flow-fields of the slipper pair when using mineral oil and seawater as service fluid were also calcu- lated respectively under the sameborder condition but the micro deformation was neglected. From the ca-l culation and analysis results, it is concluded that the damping effect caused by the slipper orifice and the variable flow channel is intensified dueto the turbulent flow and change in velocity-field under seawater lu- brication. The base body of the stainless-steel/ composite macromolecular plastic slipper supports the main load, and the obvious deformation of the sealing region changes the pressure-field. All these make theload carrying capacity of the slipper pair decreased compared with the design value. So compensation methods