并五苯作为ITO缓冲层对有机电致发光二极管发光效率改善.pdfVIP

Efficiency improvement of organic light-emitting 1 diodes with pentacene as the buffer layer on ITO 1 1 2 Shengwei Shi , Junbiao Peng , Dongge Ma 1Institute of Polymer Optoelectronic Materials and Devices, South China University of Technology, Guangzhou 510640, P. R. China 2State Key Laboratory of Polymeric Physics and Chemistry, Changchun Institute of Applied Chemistry, Changchun, 130022, P. R. China Email: shisw@ Abstracts We report a study of Alq3-based organic light-emitting diodes (OLEDs) with a pentacene film deposited on indium tin oxide (ITO) as the buffer layer. The device with 1.0 nm pentacene layer shows the most efficient one as compared with the optimal standard device without a pentacene layer. The current and power efficiency are increased from 3.91 cd/A and 2.22 lm/w to 4.54 cd/A and 2.84 lm/w, respectively, and the luminance is also improved by 32%. Keywords: pentacene, buffer layer, hole injection, organic light-emitting diodes 1 Introduction Since the first demonstration of the organic light-emitting devices (OLEDs) in 1987 [1], a large research effort is focused on improving the performance of OLEDs and understanding the device physics. For most OLEDs, the barrier height for holes is relatively lower than that for electrons, and the mobility of holes in an organic layer is larger by orders of magnitude than that of electrons, so the hole current is much larger than the e