C-dump变换器开关控制方法分析与比较.pdfVIP

第22 卷 第8 期 中 国 电 机 工 程 学 报 Vol.22 No.8 Aug. 2002 2002 年8 月 Proceedings of the CSEE ©2002 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2002) 08-0076-06 C-dump 变换器开关控制方法的分析与比较 周 波, 耿云亮, 傅 颖, 严仰光 (南京航空航天大学航空电源部级重点实验室, 江苏 南京 210016) ANALYSIS AND COMPARISON ON THE CONTROL STRATEGY OF THE C-DUMP CONVERTER ZHOU Bo, GENG Yun-liang, FU Ying, YAN Yang-guang (Key Laboratory of Aeronautical Power System，Nanjing University of Aeronautics Astronautics ， Nanjing 210016, China ) ABSTRACT: The C-dump converter is a new type of power 然后重点对斩波开关的滞环控制、斩波频率高于主开关频率 converter used in brushless DC motors, and its switching 的PWM 控制、斩波频率低于主开关频率的PWM 控制、主 control strategies have a major effect on the armature currents 开关与斩波开关同步 PWM 控制、主开关与斩波开关同步 ripple of the motor and the voltage fluctuation of the energy PWM 并结合斩波开关滞环控制等5 种开关控制方法进行了 recovery capacitor in the converter. This paper is devoted to 详细的理论分析与比较。结果表明：主开关与斩波开关同步 investigating the switching control strategies and their effects PWM 并结合斩波开关滞环控制可较好地减小储能电容电压 on the motor system. The two switching control strategies, 和电机电流脉动，有利于改善系统性能。最后进行了仿真与 PWM control and hysteresis control, for the main switches in 实验验证。 the converter are discussed. In particular, several switching 关键词：无刷电机；开关控制；C-dump 变换器；电流脉动； control strategies for the chopping switch are analyzed and 储能电容；脉宽调制 compared in detail, including the hysteresis control, the PWM control with higher or lower swit