基于FPGA智能交通控制系统研究与设计.docVIP

毕业设计说明书(论文) 作 者： 学 号： 系 ： 信息工程 专 业： 通信工程 题 目： 基于FPGA的智能交通控制系统 的设计与实现 指导者： (姓 名) (专业技术职务) 评阅者： (姓 名) (专业技术职务) 2012 年 6 月 吉 林毕业设计说明书（论文）中文摘要 交通灯是城市交通监管系统的重要组成部分，对于保证机动车辆的安全运行维持城市道路的顺畅起到了重要作用。本文在EDA技术的基础上，利用FPGA的相关知识设计了交通灯控制系统，整个设计系统通过Max+Plus软件进行了模拟仿真，验证了设计的交通信号灯控制电路完全可以实现预定的功能，具有一定的实用性。Max+PlusⅡ 毕业设计说明书（论文）外文摘要 Title The design of Intelligent Traffic Lights Based on FPGA Abstract The traffic lights in urban traffic control system plays an important part of ensuring the safe operation of motor vehicles and played an important role in keeping smooth urban roads. With the increasing number of vehicles, traffic problems will become increasingly serious. It could be solved by constructing more road or limited the travel of traffic, but the increase in the road limited will suppress automotive industry. At present, the traffic in developed countries is mainly to intelligence traffic direction. Such as fitting a car with navigation systems and making full use of electronic equipment to improve the existing road transport system to deliver. Traffic light plays an important tool for urban traffic management and traffic lights on the impact of road traffic aroused wide attention of scholars in recent years. This article in EDA technology design an intelligent traffic light control system based on the use of FPGA-related knowledge.This design of system used for simulation through the Max + PlusⅡcould verify the design of the traffic light control circuit can achieve the expected function and has a certain practicality. Keywords Intelligent Traffic Lights; EDA; FPGA; Max+PlusⅡ 目 录 毕业设计说明书（论文）中文摘要 Ⅰ 毕业设计说明书（论文）外文摘要 Ⅱ 目录 Ⅲ 第1章 绪论 1 1.1 课题的提出和意义 1 1.2