11_energy_methods 材料力学英文版课件.ppt

11 Energy Methods Energy Methods Strain Energy Strain Energy Density Strain-Energy Density Elastic Strain Energy for Normal Stresses Elastic Strain Energy for Normal Stresses Strain Energy For Shearing Stresses Strain Energy For Shearing Stresses Sample Problem 11.2 Sample Problem 11.2 Sample Problem 11.2 Strain Energy for a General State of Stress Impact Loading Example 11.06 Example 11.06 Example 11.07 Example 11.07 Design for Impact Loads Work and Energy Under a Single Load Work and Energy Under a Single Load Deflection Under a Single Load Sample Problem 11.4 Sample Problem 11.4 Sample Problem 11.4 Work and Energy Under Several Loads Castigliano’s Theorem Deflections by Castigliano’s Theorem Sample Problem 11.5 Sample Problem 11.5 Sample Problem 11.5 ? 2002 The McGraw-Hill Companies, Inc. All rights reserved. MECHANICS OF MATERIALS ThirdEdition Beer ? Johnston ? DeWolf MECHANICS OF MATERIALS Third Edition Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf Lecture Notes: J. Walt Oler Texas Tech University CHAPTER ? 2002 The McGraw-Hill Companies, Inc. All rights reserved. Strain Energy Strain Energy Density Elastic Strain Energy for Normal Stresses Strain Energy For Shearing Stresses Sample Problem 11.2 Strain Energy for a General State of Stress Impact Loading Example 11.06 Example 11.07 Design for Impact Loads Work and Energy Under a Single Load Deflection Under a Single Load Sample Problem 11.4 Work and Energy Under Several Loads Castigliano’s Theorem Deflections by Castigliano’s Theorem Sample Problem 11.5 A uniform rod is subjected to a slowly increasing load The elementary work done by the load P as the rod elongates by a small dx iswhich is equal to the area of width dx under the load-deformation diagram. The total work done by the load for a deformation x1,which results in an increase of strain energy in the rod. In the case of a linear elastic deformation, To eliminate the effects of size, evaluate the strain- energy per unit volume