无线电能传输发射和接收定向螺旋状天线的设计.docVIP

本科生毕业论文（设计） 题目：无线电能传输发射和接收定向螺旋状天线的设计 学 部 信息科学与工程学部 学科门类 工学 专 业 电气工程及其自动化 学 号 姓 名 指导教师 2014年5月日  无线电能传输是将电源的电能转变为可无线传播的电能，在接收端又将此电能转变回电能，从而到达对用电器的无线供电。本课题是利用电磁场的谐振方法，发射和接收线圈在某一个射频点上谐振，从而达到电能在中等距离传输的目的。磁共振耦合无线电能传输是通过发射线圈与接收线圈的磁场耦合共振来实现电能的无线传输。本课题通过介绍磁共振耦合无线电能传输的工作原理在此基础上设计参数数据并实验验证。磁共振耦合无线电能传输中处于谐振的两个线圈共振频率一般设置在0.5-50MHz之间,共振频率越高,传输效率越高.但是在实际应用过程中,频率越高对电路器件要求相对也就越高,故一般选取频率不宜超过10MHz,本课题选取频率是8MH来计算并且实验验证收发线圈方向性，在不同距离下收发线圈间传输频率与接收电压值的关系和传输距离与接收电压值的关系以及脉冲波占空比对接收电压的影响。 关键词：无线电能传输；；；谐振频率；参数 Transmitting And Receiving Wireless Power Transmission Directional Helical antenna Design ABSTRACT The wireless power transfer is transforming the electric power to the radio transmission power，at the receiving and turn the power back to the power, so as to reach the wireless power supply for electrical appliances.This article is using the electromagnetic resonance method, transmitting and receiving coils on a certain point of the radio frequency resonance, so as to achieve the purpose of the electricity in the medium distance transmission. Magnetic resonance coupling can radio transmission is by emitting and receiving coil coil magnetic field coupling resonance to realize the wireless transmission of electricity. This topic through the introduction of the working principle of magnetic resonance coupling radio can transmit data on the basis of the design parameters and experimental verification. Magnetic resonance coupling in the radio can transmit at a resonant frequency resonance of the two coil generally set between 0.5 to 50 MHZ, the higher the resonant frequency, the higher the transmission efficiency. But in the process of practical application, the higher the frequency of circuit components are also in the more demanding, so the general selection frequency should not be more than 10 MHZ, this topic selection is 8 mh to transmit frequency calculation and experimental verification transceiver c