电袋除尘器 设计 简述.docVIP

摘 要 本毕业设计的课题来源于，主要任务是设计 本文在详述国内研究现状的基础上，对的本体结构进行了设计，对一些关键部分进行了设计计算。重点是的设计及校核。 本文设计的，的基本框架；，，，，，，。 本文对设计计算，特别是对分析计算。经过校核，在，该。 关键词：；；； Abstract This graduate design topic from the protection of the environment is approaching, main task is to design the bag filter ontology steel structure. This paper described in domestic filter based on the present research, to electric bag filter ontology of structure design, and some key parts of design calculation. Key is electricity bag filter steel stents. Shell, the gas chamber, and net out dust system structure design and check. In this paper the design of electric bag filter USES is horizontal dry type electric bag filter, steel stents shell is the basic framework of bag filter; Mainly USES the welding way. One bag dust removal in part by the four rooms, each room is equipped with two a ash hopper, flue gas in the top of the ash hopper just enter the exhaust is located in the top of the separated room, and on the structure and cent to become one room, so that effective reduced pressure loss, filter shell have rock wool thermal insulation layer, outside pressure type color plate armor shell, each unit set up a set of independent pulse out dust devices, in order to guarantee the dust get clear in time. In this paper, the electric bag filter steel stents, shell, net of the gas chamber, the clear grey system calculation in design, especially to carry on the analysis and calculation of stress. After checking, in natural conditions, the electric bag filter can satisfy the requirements of operation. Key words: electric bag filter; Lifting the device; Shell; Clear grey system 目 录 摘 要 I Abstract II 1 绪 论 1 1.1国内外电袋除尘器的研究现状 1 1.2国内的发展趋势 7 1.3 本课题的研究目的及意义 9 2 的总体方案设计 11 2.1 的功能要求 11 2.1.1电袋除尘器的工作过程 11 2.1.2电袋除尘器的基本功能 11 2.1.3电袋除尘器的主要设计参数 12 2.方案设计 12 2.2.1壳体的结构形式 13 2.2.2 壳体的主要组成部件 14 2.2.3 壳体的设计计算 14 2.3电袋除尘器净气室的方案设计 12 2.3.1 净气室结构形式 13 2.3.2 净气室的主要组成部件 14 2.3.3 净气室的设计计算 14 2.4电袋除尘器的清灰系统的方案设计 12 2.4.1 清灰系统的结构形式 13 2.4.2 清灰系统的主要