icemsurf 物体对称操作.pptVIP

ICEM surf Training Move and symmetry *Move ~Active: -pull down menu the function Modify - Move can - by the icon in the service functions block. *Move - Rotate Geometry objects can be rotated and additionally scaled. *Move - Translate With this function, objects are translated by a translation vector. *Move - Scale - each of the three coordinates can be specified different scaling factors and an arbitrary center of rotation. *Move - Mirror A mirrored image of geometry objects will be computed. The current work plane is used as mirror-plane. *Move - Extrapolate Curves and patch edges can be extrapolated or trimmed. *Move - 2 Planes - a complex translation and rotation.. - translations and the rotations in X, Y and Z *Move - Adjust - a transformation can be computed using a specified number of pairs of points. - point clouds, the 3D position of which does not correspond to the existing  geometry, can be adjusted in this way. - Exact information on the desired transformation are not needed in this case. -Translation and Rotation is active. -If this option is switched on, additionally, the length of the two axes (b) will be used for computing a scaling.  In the example, a curve (c) similar to an original curve (a) is created using Scale . *Centerline Symmetry -pull down menu the function Modify - Symmetry -by the icon in the service functions block. ~With this function also NURBS-Patches can be manipulated. *exercise H:\ota-training\kddat\blend-sym ~practice all function ~extrapolate patch ~extrapolate curve ICEM surf Training Move and symmetry * * * *