基于internet的模具协同设计工具模块的研究.docVIP

基于internet的模具协同设计工具模块的研究 陈少克 （教育部智能制造技术实验室，汕头大学，广东，汕头，515063） 摘要：本文以VB作为开发平台，为模具协同设计人员之间的交流提供了一个新的手段，对于不在同一地方的设计人员，根据不同的设计范围、不同的模具产品信息需求深度和不同的模具产品设计方法，对网络化协同设计方法进行分类比较，提出了这些方法在网络环境中实现的关键技术。运用此工具模块可以节省交流的时间，缩短研发周期，提高产品的竞争力。 关键词: internet；协同设计；工具模块 Research of the Tool model for Mould Cooperatively Designing Based on Internet CHEN Shaoke Key Laboratory of Intelligent Manufacture Technology of Ministry of Education, Shantou University, Shantou, Guangdong, 515063,China E-mail:skchen@ Abstract：This paper uses VB as to develop terrace, providing a new means for the mould cooperatively designer exchanges one another. It is deliver software from the network information of the definition, can send out news immediately. When the customer log out, the system can save to send out automatically of news. Information is unlikely throw to lose. Still provided a customer cent set, facial expression sign, information to hint in the meantime etc. various assistance functions. For can use shorter time carries on a product of the design and manufacturing, for not at same design personnel of place, turn to be in conjunction with the design method to carry on comprehensive analysis to various network, according to the different design scope, the different product information need depth and the different product design method, turn to be in conjunction with the design method to carry on the classification comparison to the network, put forward these methods to carry out in the network environment of key technique, make use of this software can save exchanges of time, shorten the development period, raise a product of competition ability. Keywords internet; cooperatively design; tool model 1 前言 随着科技的不断进步，制造业正向数字化、全球化、网络化的方向发展，产品的生命周期越来越短，新产品的上市速度越来越快。模具是制造业的基本工艺装备，模具设计、制造的效率对产品的开发效率有决定性影响，制造业发展迅猛的趋势给模具行业带来发展机遇的同时也带来了严峻的挑战，要求模具设计制造企业具有更高的灵敏度，最大限度地缩短模具设计、制造周期，保证可靠的设计、制造品质满足客户的要求。模具产品的协同设计就是为了满足这一需求诞生的 [1]。 模具的协同设计是指由一些具有不同专长的设计人员在有限的时间内，为了完成某产品的设计任务组成不同的设计小组，通过网络在协同设计集成系统的支持下共同工作，小组成员之间共