LED汉字显示屏的设计.docVIP

LED汉字显示屏的设计(AT89S52单片机,Proteus,Keil C51)(任务书,开题报告,中期报告,毕业论文23000字,代码工程文件) 摘 要 本文结合国内外LED技术的发展和应用情况〖资料来源:毕业设计(论文)网 〗以LED点阵的显示原理为核心，全面的阐述了基于AT89S52单片机的16×16 点阵的汉字显示屏的制作思路以及制作原理。 该项目涉及了计算机及电子技术中的电源技术、单片机技术、数据通讯技术、显示技术、存储技术、系统软件技术、接口及驱动等技术，利用Keil C51 V8.16和Proteus 7.4环境编译和仿真，利用C语言编译程序。该设计利用AT89S52单片机对整个系统进行总体控制，进行显示所要显示的字符。显示方式分为两种：动态显示、静态显示，为了节约硬件成本，本文选用动态显示的方法。其中显示字模数据由单片机输入显存，点阵的点亮过程由程序控制，由驱动电路完成，点阵采用单色显示。 该显示器实现的功能是：实现了分屏、滚屏显示汉字，每屏停留2秒，滚屏后能从头显示。点阵的动态显示过程占用时间比较短，亮度比较高，而且亮度可以改变电阻进行调节。 关键词：AT89S52单片机、16×16点阵、驱动电路、字模 ABSTRACT 〖资料来源：毕业设计(论文)网 〗 This paper combining LED technology development and application of LED dot matrix display, with the principle as the core, comprehensive AT89S52 SCM is presented based on the 16 x 16 dot matrix characters display production thoughts and the production principle. This project involves the computer and electronic technology of power technology and single-chip microcomputer technology, data communication technology, display technology, storage technology, systems software technology, interface and drive technology etc, V8.16 and Proteus Keil C51 by 7.4 environment, use compile and simulation language C compiler. The design of the whole system using AT89S52 SCM in overall control, to display the display should character. Showing the way into two kinds: dynamic display, static shows that, in order to save the hardware cost, this paper selects dynamic display method. Which shows that manifested by single-chip microcomputer word-model data input, bitmap lightened by process control, process by driving circuit is complete, bitmap using monochrome display. 〖资料来源：毕业设计(论文)网 〗 The display circuit features are: realized split-screen, GunBing displaying Chinese characters, each panel, stay 2 seconds after GunBing right display. Bitmap dynamic display of the process take time is shorter, brightness is higher, and brightness can change resistance adjusted. Keywords: AT89S52 SCM, 16 x 16 dot matrix, driving circuit, font 该课题使用C语言设计LED汉字显示屏