labview与pwm.docVIP

Table of Contents目录 Introduction to Pulse Width Modulation 介绍脉宽调制 National Instruments PWM Hardware 国家仪器PWM方式硬件 Programming PWM in LabVIEW Using NI-DAQmx LabVIEW的编程脉宽调制在使用NI - DAQmx Advanced PWM Applications in LabVIEW 在LabVIEW中应用先进的PWM Related Links 相关链接 ? The National Instruments Getting Started with NI-DAQmx Series is aimed at helping you learn NI-DAQmx programming fundamentals. 美国国家仪器入门与NI - DAQmx的系列基本目的是帮助你学习的NI - DAQmx编程。 Through video and text tutorials, this series will take you from verifying your devices operation in Measurement? Automation Explorer (MAX) to programming data acquisition applications using LabVIEW. 通过视频和文字教程，这个系列将你从资源管理器中验证您的测量和自动化设备的操作（MAX）的数据采集应用的编程使用LabVIEW。 It is intended for both the beginner who wants to learn how to use the DAQ Assistant, as well as the experienced user who wishes to take advantage of advanced NI-DAQmx functionality. 其目的是为初学者谁想要学习如何使用DAQ助手，以及有经验的用户谁希望能利用先进功能的NI - DAQmx的。 Introduction to Pulse Width Modulation介绍脉宽调制 Pulse width modulation (PWM) is a technique in which a series of digital pulses is used to control an analog circuit.脉冲宽度调制（PWM）是其中一个系列的数字脉冲来控制模拟电路技术。 The length and frequency of these pulses determines the total power delivered to the circuit.的长度和这些脉冲的频率决定了总功率传递到电路。 PWM signals are most commonly used to control DC motors, but have many other applications ranging from controlling valves or pumps to adjusting the brightness of an LED. PWM信号是最常用来控制直流电动机，但有很多，从控制阀或泵来调整LED的亮度其他应用程序。 The digital pulse train that makes up a PWM signal has a fixed frequency and varies the pulse width to alter the average power of the signal.数字脉冲列车，构成了一个PWM信号有一个固定的频率和不同的脉冲宽度来改变信号的平均功率。 The ratio of the pulse width to the period is referred to as the duty cycle of the signal.脉冲的宽度比的时期被称为信号的占空比。 For example, if a PWM signal has a 10 ms period and its pulses are 2 ms long, that signal is said to have a 20 percent duty cycle.例如，如果一个PWM信号周期为10毫秒和2毫秒脉冲长，这个信号是说有百分之20的工作周期。 Figure 1 shows three PWM signals with different duty cy