热处理工艺对Q_P钢微观组织及力学性能的影响.pdfVIP

31 4 Vo 31, No4 1 2 0 0 9 7 SHANGHAI METALS Ju y , 2 0 0 9 Q P ( , 100083) QP ( Quenching and Partitioning) 超高强先进汽车用钢, 具有优异的综合机械 性能采用井式盐浴炉模拟QP 钢的热处理 艺, 并对其组织性能进行分析研究结果表 明, QP 热处理 艺决定QP 钢的组织和力学性能, QP 钢强塑积可以达到32016 MPa% 其微观组织主要由板条马氏体和残留奥氏体组成, 残留奥氏体呈膜状分布 QP 钢 热处理 板条马氏体 残留奥氏体 力学性能 EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF QUENCHING AND PARTITIONING STEEL Dong Chen Jiang Haitao Chen Yu ai Tang Di Chen Zhisong ( Nationa Engineering Research Center for Advanced Ro ing Techno ogy, University of Science and Techno ogy Beijing) Abstract Quenching and Partitioning ( QP) stee is a kind of advanced superhigh strength stee with exce ent synthet ic mechanica properties. The microstructure and properties were studied by the heat treatment processes of QP stee simu ated in sa t bath furnace. The resu ts showed that the microstructure and mechanica properties of QP stee were determined by the quenching and part itioning processes, its strength and duct i ity cou d reach 32016MPa% . The main microstructure of QP stee was ath martensite and retained f i m austenite. Key Words QP Stee , Heat Treatment, Lath Martensite, Retained Austenite, Mechanica Property , ( DP , Dua , : Phase) ( CP , Comp ex Phase) , ( TRIP , Transformat ion Induced , ; P ast icity Stee ) , 500 ~ 1000MPa,