WIN7 64位安装CW7.2官方解决方案(英文).pdfVIP

Freescale Semiconductor How to install and run Classic CodeWarrior products on 64-bit Windows 7 PC   Classic CodeWarrior products were built and delivered prior to the release of Windows 7 host OS, but it is possible to install classic CodeWarrior products on a 32-bit Windows 7 host PC and use it successfully. However, if your host PC is running 64-bit Windows 7, then you will run into trouble as the install shield will abort installation once it has detected that the host OS is 64-bit Windows 7. This paper will show you how to install and run classic CodeWarrior products on a 64-bit Windows 7 host PC using Microsoft Windows XP mode under Windows 7. Microsoft‘s Windows Virtual PC has provided a Windows XP Mode environment for Windows 7 to install and run many older Windows XP applications directly from Windows 7-based PC. Please go to this web link URL – to install Windows XP mode on your 64-bit Win 7 PC /en-US/windows7/install-and-use-windows-xp-mode-in-windows-7 There are few requirements on your 64-bit Windows 7 PC: 1 Your host PC supports Hardware Assisted Virtualization (HAV) – please use this web link to verify your PC  hardware does support HAV and turn it on in BISO if needed:  /windows/virtual‐pc/support/configure‐bios.aspx    2 Your host PC has 1 GHz or higher CPU, 2GB RAM or higher, 15 GB extra hard disk space for virtual Windows  environment. (This is Microsoft’s minimum requirement)    3 Microsoft indicates that only Windows 7 Professional, Enterprise, or Ultimate editions could use Windows XP  Mode. We tested on 64‐bit Windows 7 Professional edition.     One thing to be noted is that download and install Windows XP mode (about 500 MB) is pretty straightforward and easy, however installing Windows Virtual PC (16 MB) is not always a smooth ride. It could take