博研联盟_IEEE 推荐.pdfVIP

IEEE Std 1300-1996 IEEE Guide for Cable Connections for Gas-Insulated Substations Sponsor Insulated Conductors Committee of the IEEE Power Engineering Society Approved 1 August 1996 IEEE Standards Board Abstract: The coordination of design, material supply, installation, and test procedures required for the connection of a gas-insulated substation (GIS) is described. Preferred dimensions for mechanical and electrical interchangeability for voltage classes of 69 kV and above are established. Keywords: cable connection, gas-insulated substation (GIS) The Institute of Electrical and Electronics Engineers, Inc. 345 East 47th Street, New York, NY 10017-2394, USA Copyright © 1996 by the Institute of Electrical and Electronics Engineers, Inc. All rights reserved. Published 1996. Printed in the United States of America. ISBN 1-5597-750-X No part of this publication may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher. Authorized licensed use limited to: Hong Kong Polytechnic University. Downloaded on September 1, 2009 at 11:43 from IEEE Xplore. Restrictions apply. IEEE Standards documents are developed within the IEEE Societies and the Standards Coordinat- ing Committees of the IEEE Standards Board. Members of the committees serve voluntarily and without compensation. They are not necessarily members of the Institute. The standards developed within IEEE represent a consensus of the broad expertise on the subject within the Institute as well as those activities outside of IE