基于Matlab交流异步电机矢量控制系统的仿真建模.pdfVIP

系 统 仿 真 学 报 Vol. 16 No. 3 • 384 • JOURNAL OF SYSTEM SIMULATION March. 2004 基于Matlab 交流异步电机矢量控制系统的仿真建模 纪志成，薛 花，沈艳霞 （江南大学电气传动研究所，江苏无锡 214036 ） 摘 要：在分析交流异步电机数学模型的基础上，提出了交流异步电机控制系统仿真建模的新方法。 在 Matlab/Simulink 中，建立独立的功能模块，如电机本体模块、矢量控制模块、速度控制模块、电 流滞环控制模块等，再进行功能模块的有机整合，搭建交流异步电机控制系统的仿真模型。系统采用 双闭环控制：速度环采用 PI 控制，电流环采用电流滞环控制。仿真结果证明了该方法的合理性、有 效性，为实际电机控制系统的设计和调试提供了新的思路。 关键词：交流异步电机；仿真建模；Matlab ；矢量控制 文章编号：1004-731X(2004)03-0384-06 中图分类号：TM34 文献标识码：A Modeling and Simulation of AC Asynchronism Motor Vector Control System Based on Matlab JI Zhi-cheng，XUE Hua ，SHEN Yan-xia (Institute of Electric Drive ，Southern Yangtze University，Wuxi, Jiangsu 214036，China) Abstract: Based on the mathematical model of AC asynchronism motor, a novel method for modeling and simulation of AC asynchronism motor control system in Matlab has been proposed. In Matlab/Simulink, the independent functional blocks, such as Moter model block, Vector control block, Speed controller block, and Hysteresis current controller block etc, have been modeled . By the organic combination of these blocks, the model of control system can be established easily. In the double loop of control system, a PI controller is adopted in the speed loop and a hyteresis current controller is adopted in the current loop. The reasonability and validity have been testified by the simulation results and this novel method offers a new thoughtway for designing and debugging actual motors. Keywords: AC asynchronism motor; modeling and simulation; Matlab; vector c