GSM呼叫流程及CDMA切换技术.ppt

GSM呼叫流程及CDMA切换技术 Roy Han 导频强度测量消息(PSMM) REVERSE TRAFFIC CHANNEL -- Pilot Strength Measurement Msg protocol_rev = 6 (IS2000) chan_type = 4 (Reverse Traffic) chan rtc_msg gen msg_type = 5 (Pilot Strength Measurement) pil_str ref_pn = 16 (0x10) ? reference pn pilot_strength = 18 ? -9dB (-0.5*pilot_strength) keep = 1 ? keep indicator(‘1’:keep, ‘0’:drop) num_msr = 3 (0x3) meas[0] pilot_pn_phase = 24962 (0x6182 )?① PN390 【导频PN序列相位，显示数为绝对值】 pilot_strength = 16 ?-8dB keep = 1?② meas[1] pilot_pn_phase = 11776 (0x2e00) ?184 pilot_strength = 28 ? -14dB keep = 1 导频强度测量消息(PSMM) ① Pilot PN Phase PILOT_ARRIVAL+(64*PILOT_PN))mod 215 = Pilot_pn_phase Pilot_pn_phase= 24960 ? pilot_pn = 390 PILOT_PN_PHASE=(2+(64*390))mod 215 = 24962 ? PN 390 + 2chip delay ② Keep Pilot Indicator If the handoff drop timer corresponding to the pilot used by the mobile station to derive its time reference has expired, the mobile station shall set this field to ‘0’; otherwise, the mobile station shall set this field to ‘1’ PN 16 and PN 184 are the same BTS and PN 390 is the other sector. Hence there are 2 BTS and 3 sector = 3waysoftsofter handoff area And all of the ‘keep fields’ within the message are ‘1’, so we know this is the add procedure ※PSMM消息中出现的导频包含激活集和候选集的所有导频 通用切换指示消息(UHDM) FORWARD TCH--Universal Handoff Direction Msg protocol_rev = 6 (IS2000) chan_type = 3 (Forward Traffic) msg_type = 34 (Universal Handoff Direction) uhdm_msg hdr ack_seq = 1 msg_seq = 0 ack_req = 1 encryption = 0 use_time = 0 hdm_seq = 2 parms_incl = 0 ? p_rev serv_neg_type nclude indicator search_included = 1 ? pilot search parameter include indicator 【基站指示移动台改变导频搜索参数设定该值为‘1’】 srch srch_win_a = 9 ?① 80chip srch_win_n = 10 ? ① 100chip